Proportional Pressure Solenoid Valve
Show/hide table
Illustration 1 | g00279567 |
Proportional Pressure Solenoid Valve (1) Cartridge assembly. (2) Coil assembly. (3) Nut. |
A proportional pressure solenoid valve is used at each individual wheel brake in order to apply pressure to a particular brake when the solenoid valve is supplied with hydraulic pressure and the solenoid is supplied with an electronic signal. The solenoid valve allows the wheel brake to be applied with a force that is proportional to the amount of current that is supplied to the solenoid. Coil (2) must be removed from the solenoid valve before cartridge assembly (1) is serviced.
Caterpillar Information System:
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Proportional Pressure Solenoid Valve
D10R Track-Type Tractor Engine Valve Lash - Check/Adjust
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System On/Off Pilot Solenoid Valve
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System On/Off Pilot Solenoid Valve
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Electrical System
657G Wheel Tractor-Scraper Hydraulic System Operational Checks
2004/04/19 A New Hydraulic Oil Cooler is Now Available {1374}
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 13 Filtered Oil Pressure Sensor out of calibration
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 04 Filtered Oil Pressure Sensor shorted low
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 03 Filtered Oil Pressure Sensor shorted high
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 02 Filtered Oil Pressure Sensor misinstalled
D11R Track-Type Tractor Model Specific Coolant Information
C-9 Engine for Caterpillar Built Machines Sensors and Electrical Connectors
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System System Schematic
D10R Track-Type Tractor Refrigerant Dryer - Replace
C-9 Engine for Caterpillar Built Machines System Configuration Parameters
2002/10/28 Special Instructions, REHS1431, "Hitch Bore and Steering Cylinder Bore Dimensions for Wheel Skidders and Feller Bunchers" is Available {4303, 7051}
2002/11/25 The Assembly Procedure of the Carrier for the Transmission Planetary has Changed {3160, 3186}
3054E Industrial Engine Fan - Remove and Install
637G Wheel Tractor-Scraper Wheel Scraper Power Train Differential and Bevel Gear
3054E Industrial Engine V-Belts - Remove and Install
637G Wheel Tractor-Scraper Wheel Scraper Power Train Differential - No-SPIN
Usage for Classic Parts Steering Clutch Kits{4101} Usage for Classic Parts Steering Clutch Kits{4101}
3508 and 3516 EUI Engines and 5130 and 5230 Excavators Flywheel