On/Off Pilot Solenoid Valve
Show/hide table
 | |
| Illustration 1 | g00278490 |
(1) Torque for the locknut ... 3.00 ± 0.50 N·m (2.2 ± 0.37 lb ft)
(2) Torque for installing the solenoid ... 25 ± 5 N·m (18.5 ± 3.7 lb ft)
Coil resistance at 25° ± 5°C (77° ± 41°F) ... 34.3 ± 1.7 ohms
Caterpillar Information System:
3054C Industrial Engine and C4.4 Marine Auxiliary Generator Set Electrical System
657G Wheel Tractor-Scraper Hydraulic System Operational Checks
2004/04/19 A New Hydraulic Oil Cooler is Now Available {1374}
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 13 Filtered Oil Pressure Sensor out of calibration
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 04 Filtered Oil Pressure Sensor shorted low
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 03 Filtered Oil Pressure Sensor shorted high
3516B Engine for Caterpillar Built Machines MID 036 - CID 0543 - FMI 02 Filtered Oil Pressure Sensor misinstalled
D11R Track-Type Tractor Model Specific Coolant Information
D10R Track-Type Tractor Cooling System Extended Life Coolant Extender - Add
3054E Industrial Engine Flywheel - Remove
631G and 637G Wheel Tractor-Scrapers Hydraulic System Bail Cylinder
D10R Track-Type Tractor Safety Messages
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System On/Off Pilot Solenoid Valve
D10R Track-Type Tractor Engine Valve Lash - Check/Adjust
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Proportional Pressure Solenoid Valve
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System Proportional Pressure Solenoid Valve
C-9 Engine for Caterpillar Built Machines Sensors and Electrical Connectors
938G Wheel Loader, 938G Series II Wheel Loader, IT38G Integrated Toolcarrier and IT38G Series II Integrated Toolcarrier Traction Control System System Schematic
D10R Track-Type Tractor Refrigerant Dryer - Replace
C-9 Engine for Caterpillar Built Machines System Configuration Parameters
2002/10/28 Special Instructions, REHS1431, "Hitch Bore and Steering Cylinder Bore Dimensions for Wheel Skidders and Feller Bunchers" is Available {4303, 7051}
2002/11/25 The Assembly Procedure of the Carrier for the Transmission Planetary has Changed {3160, 3186}
3054E Industrial Engine Fan - Remove and Install
637G Wheel Tractor-Scraper Wheel Scraper Power Train Differential and Bevel Gear