C13 and C15 On-highway Engines Caterpillar


Vehicle Overspeeds

Usage:

C15 B5R
When the vehicle speed exceeds the value of the "Vehicle Overspeed Threshold" parameter, the Engine Control Module (ECM) takes the following actions:

  • A "84-0 Wheel-Based Vehicle Speed : High - Most Severe (3)" code is activated and logged.

  • The injector solenoids are disabled.

Customer passwords are required to clear the logged code.

The ECM will enable the injector solenoids when the vehicle speed is below the value of the "Vehicle Overspeed Threshold" parameter.

If the speedometer indicates a speed that is below the value of the "Vehicle Overspeed Threshold" parameter and this code occurs, the vehicle speed calibration may be incorrect. Refer to Troubleshooting, "Vehicle Speed - Calibrate".

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.