Clean Gas Induction Cooler
Show/hide table
Illustration 1 | g01165709 |
(1) Torque for two clamps ... 10.0 ± 0.5 N·m (90 ± 4 lb in)
Caterpillar Information System:
C13 and C15 On-Highway Engines Compression Brake - If Equipped
C9 Generator Set Fuel System Primary Filter (Water Separator) Element - Replace
3500 Engines with EUI Option Fuel Injector
2005/06/06 New Ignition Transformers are Used {1561}
C9 Engine for Caterpillar Built Machines Air Inlet Heater - Remove
3500B and 3500C Generator Set Engines Engine Speed/Timing Sensor - Calibrate
C27 and C32 Industrial and Petroleum Engines Throttle Position Sensor Circuit - Test
TH48-E80 Petroleum Transmission Transmission Operation
C27 and C32 Generator Set Engines E362 Engine Overspeed
C4.4 Marine Generator Set Engines Crankcase Breather - Remove and Install
C7 On-highway Engine Electronic Control System Components
C27 and C32 Industrial and Petroleum Engines Diagnostic Code Cross Reference
C7 On-highway Engine Fuel Injector - Test
C27 and C32 Industrial and Petroleum Engines Ether Injection System - Test
C7 On-highway Engine Fuel System
G3500 Engines Air Starting Motor - Disassemble
C4.4 Industrial Engine Engine Electronics
2005/05/23 A New Fuel Transfer Pump Has Been Released {1256}
2014/08/07 A New Fuel Transfer Pump Has Been Released {1256}
C4.4 Industrial Engine Gauges and Indicators
C4.4 Industrial Engine Monitoring System
C9 Engine for Caterpillar Built Machines Air Inlet Heater - Install
3500 Generator Sets Reference Material
793F Off-Highway Truck Differential Warm-up and Break-in