C3.3 and C4.4 Generator Sets Caterpillar


Crankshaft Front Seal - Remove

Usage:

C3.3DE33E0 EC3

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
1P-2320  Combination Puller 

Start By:

  1. Remove the crankshaft pulley. Refer to Disassembly and Assembly, "Crankshaft Pulley - Remove and Install".


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g01266942

  1. Install the legs of Tooling (A) behind crankshaft front seal (1). Install a suitable spacer (2) between Tooling (A) and crankshaft (3). Use Tooling (A) in order to pull the crankshaft front seal out of the front housing.

    Note: Do not damage the bore for the crankshaft front seal in the front housing.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.