Coolant Temperature Sensor - Remove and Install
Show/hide table
| 注意 |
|---|
|
在检查、保养、测试、调整及维修产品时，请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前，请准备好盛接液体用的适当容器。 |
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 将冷却系统的冷却液中排入适当的容器至液位低于冷却液温度调节器，以便保存或废弃。 请参考操作和保养手册, "冷却系统冷却液 - 更换"。
Show/hide table
图 1 g01129266 - 断开线束组件并拆下冷却液温度传感器 (1)。
- 将 O 形密封圈从冷却液温度调节器上拆下。
- 如有必要，将接头从水温调节器壳体上拆下。 从接头上卸下 O 形密封圈。
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 在接头上安装一个新的 O 形密封圈。 将接头安装在水温调节器壳体内。
- 在冷却液温度传感器 (1) 上安装一个新的 O 形密封圈。
- 安装冷却液温度调节器 (1) 并拧紧至扭矩为
20 ± 5 N·m (15 ± 4 lb ft) 。 - 连接线束组件。
- 加注冷却系统。 请参考操作和保养手册, "冷却系统冷却液 - 更换"。
Show/hide table
| |
| 图 2 | g01129266 |
Caterpillar Information System:
3508C, 3512C and 3516C Marine Engines Turbocharger Outlet Pressure Sensor - Remove and Install
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Evaporator Coil
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Refrigerant Receiver-Dryer
C32 Marine Engines Analog Sensor Supply Circuit - Test
2005/03/01 A New Sleeve Kit Is Now Available {1713}
C9 Industrial Engines Diagnostic Flash Code Retrieval
C7 Industrial Engine Engine Monitoring System (EMS)
3126B Petroleum Engine ECM/Personality Module - Test
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C4.4 Industrial Engine Customer Specified Parameters
C7 On-Highway Engine Alternator - Remove and Install
3406E, C12, C15 and C18 Marine Engines E119 Low Fuel Level
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Refrigerant Expansion Valve
3508C, 3512C and 3516C Marine Engines Turbocharger Inlet Pressure Sensor - Remove and Install
C7 Petroleum Engine Engine Oil and Filter - Change
C9 Industrial Engines Plate Locations and Film Locations
3500B High Displacement Generator Set Engines Reference Material
345C Excavator Hydraulic System Pump Control (Output Flow) - Adjust
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Pressure Switch (Refrigerant Pressure Cutoff)
2004/12/01 Updated Information to Operation and Maintenance Manual, SEBU6251 , "Engine Oil (3116 and 3126 Marine Engines" {1348, 7581}
3508C, 3512C and 3516C Marine Engines Engine Oil Pressure Sensor - Remove and Install
2004/12/01 New Cooling Screens in TMI for Electric Power Packages {1353}
3406C Engines for Caterpillar Built Machines Alternator and Regulator
3508C, 3512C and 3516C Marine Engines Fuel Pressure Sensor - Remove and Install