A New Sleeve Kit Is Now Available {1713}
- On-highway Engines:
- C11 (S/N: KCA1-2365)
- C13 (S/N: KCB1-14118)
A new Sleeve Kit is now available for the On-highway Engines that are listed above. The 263-8162 Sleeve Kit (INJECTOR) is intended only as a field replacement for the serial number ranges that are listed above. The new kit offers improved reliability over the previous injector sleeves. The kit can be installed in the field without any modifications to the cylinder head.
Refer to Special Instruction, REHS2410, "Field Installation of the 263-8162 Sleeve Kit (INJECTOR)" for additional information on installation procedures.
Caterpillar Information System:
C9 Industrial Engines Diagnostic Flash Code Retrieval
C7 Industrial Engine Engine Monitoring System (EMS)
3126B Petroleum Engine ECM/Personality Module - Test
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
C4.4 Industrial Engine Customer Specified Parameters
C7 On-Highway Engine Alternator - Remove and Install
3406E, C12, C15 and C18 Marine Engines E119 Low Fuel Level
3406E, C12, C15 and C18 Marine Engines E056 High Fuel Temperature Warning
374F Excavator Mirror Installation
345 MHPUC Mobile Hydraulic Power Unit Machine System Specifications Fuel Lines
2004/12/01 The Process For Remanufacturing the Crankshaft Has Been Updated {1202}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C32 Marine Engines Analog Sensor Supply Circuit - Test
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Refrigerant Receiver-Dryer
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Evaporator Coil
3508C, 3512C and 3516C Marine Engines Turbocharger Outlet Pressure Sensor - Remove and Install
3508C, 3512C and 3516C Marine Engines Coolant Temperature Sensor - Remove and Install
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Refrigerant Expansion Valve
3508C, 3512C and 3516C Marine Engines Turbocharger Inlet Pressure Sensor - Remove and Install
C7 Petroleum Engine Engine Oil and Filter - Change
C9 Industrial Engines Plate Locations and Film Locations
3500B High Displacement Generator Set Engines Reference Material
345C Excavator Hydraulic System Pump Control (Output Flow) - Adjust
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Pressure Switch (Refrigerant Pressure Cutoff)