Keep Alternators Without Pulleys In A Horizontal Position During Installation To Prevent Internal Damage{1405}
Usage:
Caterpillar Engines Equipped With 6T1193, 6T1194, 6T1195, 6T1196, 3T8753 Alternators
Shipment of the above alternators is made with a temporary spacer where the pulley normally fits. The spacer prevents movement of internal parts during shipment. After removal of the spacer, and before assembly of the pulley, do not put the alternator in a vertical position. With the alternator in a vertical position, it is possible for the rotor to move down and cause damage to the rotor or other internal parts.
The pulley must be assembled with the rotor in a horizontal position, not vertical. Correct assembly of the pulley puts the rotor in the correct position and prevents damage to internal parts.
Caterpillar Information System:
1983/08/15 Recommendations For Use Of 6V6125 Infrared Thermometer{0651}
1983/08/15 New Liner Seat Insert Available{1217}
1983/08/15 New Actuator Cylinder Used In Air Shutoff{7418,1078}
1983/08/15 New Filter Orifice Helps Prevent Governor Surge{1264,1263}
1983/08/15 Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15 New Service Tools Available{0600}
1983/08/08 New Procedure And New Tool Can Be Used To Remove Cylinder Sleeves From The Cylinder Block{1222,1223}
1983/08/08 Special Instruction Has Repair Procedure For 6V4060 Engine Set Point Indicator Group{0651}
1983/08/08 New Housing Assembly, Front Housing And Carrier Used In 8L4230 And 8L4231 Marine Gear Groups (Twin Disc MG509){3300}
1983/08/08 Hydraulic Boring Machine Available{0664}
1983/08/08 Failure Of Ballstud In Control Valve Can Cause Problem With Control Of Vessel{3313}
1983/08/08 New 6V7070 And 6V7800 Digital Multimeters Available{0651}
1983/08/15 Repair Of Damaged Threads{0660}
1983/08/15 Recommendations To Avoid Piston Seizures{1214,1213,1215}
1983/08/15 Digital Tachometer Available{7462}
1983/08/15 New Turbocharger Exhaust Coupling Prevents Exhaust Gas Leakage{1052,1059,1061}
1983/08/15 3512 Generator Set Engines (1500 And 1800 RPM) Must Use Flywheel Balance Weights{1156}
1983/08/15 Troubleshooting Engine Vibration; Damper Adapter Can Be Changed{1205,1000}
1983/08/15 New Fuel Ratio Control Group Has Improved Diaphragm{1278,1257,1251}
1983/08/15 New Water Seals Used In Cylinder Head Groups{1115,1101}
1983/08/15 Replacement Parts And Service For 6V3021 Crimping Tool And 6V3022 Cable Cutter{0610}
1983/08/22 Improved Voltage Regulator Assembly Now Used{4450,4467}
1983/08/22 New Governor Drive Gears And Weight Assemblies{1264}
1983/09/05 New Inspection Report Forms Available{0336,0372,7550}