Ejector Carrier Rollers - Inspect/Pack/Replace
Park the machine on level ground. Lower the bowl and close the apron.
The ejector carrier rollers are located at the base of the ejector. There are 2 ejector carrier rollers.
Show/hide table
| |
| Illustration 1 | g00584096 |
Remove the debris from the roller in order to inspect the roller. Pack the bearings of the rollers.
Refer to Disassembly and Assembly , SENR9169, "Ejector Carrier Rollers" for additional information.
Refer to Specifications, SENR8658, "Ejector"
for additional information on packing the bearings.
Caterpillar Information System:
613C Series II Wheel Tractor-Scraper Cooling System Water Temperature Regulator - Replace
615C Series II Wheel Tractor-Scraper Ejector Carrier Rollers - Check/Adjust
994D Wheel Loader Machine System Gear Pump (Pilot and Implement Oil Cooler) - Disassemble
D6R Series II Track-Type Tractor Hydraulic System Counterbalance Valve
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Component Description
D6R Series II Track-Type Tractor Hydraulic System Steering Control Valve
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Auxiliary Water Pump
Installation of Multishank Ripper 7PP{6310, 6315, 6316} Installation of Multishank Ripper 7PP{6310, 6315, 6316}
613C Series II Wheel Tractor-Scraper Cooling System Coolant (ELC) - Change
545 Wheel Skidder Engine Supplement Radiator - Remove and Install
963C Track-Type Loader Power Train Hydraulic Drive Pump - Install
545 Wheel Skidder Engine Supplement Turbocharger - Remove and Install
615C Series II Wheel Tractor-Scraper Ejector Guide Rollers - Check/Adjust
3034 Engine for Caterpillar Built Machines Coolant Temperature Switch - Remove and Install
3054 and 3056 Industrial and Generator Set Engines Air Inlet Elbow
613C Series II Wheel Tractor-Scraper Cutting Edges and End Bits - Inspect/Replace
615C Series II Wheel Tractor-Scraper Ejector Guide Rollers - Inspect/Replace
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Cylinder Head
D8R Series II Track-Type Tractor Radiator Guard Pin Joint - Inspect
615C Series II Wheel Tractor-Scraper Ejector Support Rollers - Check/Adjust
615C Series II Wheel Tractor-Scraper Ejector Support Rollers - Inspect/Replace
3034 Engine for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
615C Series II Wheel Tractor-Scraper Elevator Chain - Inspect/Adjust
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Flywheel - Install