615C Series II Wheel Tractor-Scraper Caterpillar


Ejector Guide Rollers - Inspect/Replace

Usage:

615C 2XG
Park the machine on level ground. Lower the bowl.

The ejector guide rollers are located at the middle of the ejector. There are 2 ejector guide rollers.



Illustration 1g00585826

Remove the debris from the roller in order to inspect the roller.

Refer to Disassembly and Assembly , SENR9169, "Ejector Guide Rollers" for additional information.

Caterpillar Information System:

613C Series II Wheel Tractor-Scraper Cutting Edges and End Bits - Inspect/Replace
3054 and 3056 Industrial and Generator Set Engines Air Inlet Elbow
3034 Engine for Caterpillar Built Machines Coolant Temperature Switch - Remove and Install
615C Series II Wheel Tractor-Scraper Ejector Guide Rollers - Check/Adjust
615C Series II Wheel Tractor-Scraper Ejector Carrier Rollers - Inspect/Pack/Replace
613C Series II Wheel Tractor-Scraper Cooling System Water Temperature Regulator - Replace
615C Series II Wheel Tractor-Scraper Ejector Carrier Rollers - Check/Adjust
994D Wheel Loader Machine System Gear Pump (Pilot and Implement Oil Cooler) - Disassemble
D6R Series II Track-Type Tractor Hydraulic System Counterbalance Valve
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Component Description
D6R Series II Track-Type Tractor Hydraulic System Steering Control Valve
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Auxiliary Water Pump
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Cylinder Head
D8R Series II Track-Type Tractor Radiator Guard Pin Joint - Inspect
615C Series II Wheel Tractor-Scraper Ejector Support Rollers - Check/Adjust
615C Series II Wheel Tractor-Scraper Ejector Support Rollers - Inspect/Replace
3034 Engine for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
615C Series II Wheel Tractor-Scraper Elevator Chain - Inspect/Adjust
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Flywheel - Install
Quick Coupler (Dedicated Wedge Lock) Storage
525B Wheel Skidder, 535B Wheel Skidder and 545 Wheel Skidder Grapple Glossary of Electrical Terms
613C Series II Wheel Tractor-Scraper Differential and Final Drive Oil - Change
545 Wheel Skidder Power Train Steering Frame Lock - Separate and Connect
994D Wheel Loader Machine System Window Wiper and Wiper Motor (Rear) - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.