Engine Oil Level - Check
Show/hide table
| NOTICE |
|---|
Do not under fill or overfill engine crankcase with oil. Either condition can cause engine damage. |
Note: An accurate measurement of the engine oil level cannot be obtained while the engine is running. Only use the "ENGINE RUNNING" side of the engine oil dipstick to ensure that there is adequate oil for engine operation. Do not add oil while the engine is running.
- Park the machine on level ground and stop the engine. Wait for 20 minutes so that all of the engine oil can return to the oil pan.
- Remove the engine access cover on the left side of the machine.
Show/hide table
 | |
| Illustration 1 | g00528876 |
- Maintain the engine oil within the marks on the "ENGINE STOPPED" side of engine oil dipstick (2) .
Show/hide table
 | |
| Illustration 2 | g00528886 |
- Remove engine oil filler cap (1) and add oil through the filler tube, if necessary.
- Install the engine access cover.
Caterpillar Information System:
611 Wheel Tractor-Scraper Cooling System Pressure Cap - Clean/Replace
515 Wheel Skidder and 525 Wheel Skidder Transmission and Grapple Electronic Control System System Schematic
515 Wheel Skidder and 525 Wheel Skidder Hydraulic System Oil Sample - Obtain
515 Wheel Skidder and 525 Wheel Skidder Transmission and Grapple Electronic Control System Electrical Connector - Inspect
963B Track-Type Loader Radiator Pressure Cap - Clean/Replace
D9R Track-Type Tractor Steering Clutch and Brake Control
3046 Engine For Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
515 Wheel Skidder and 525 Wheel Skidder Hydraulic System Oil Filter - Replace
515 Wheel Skidder and 525 Wheel Skidder Transmission and Grapple Electronic Control System Glossary of Electrical Terms
963B Track-Type Loader Bucket Teeth and Cutting Edges - Inspect/Replace
994D Air System Wheel Loader Air Starting System
515 Wheel Skidder and 525 Wheel Skidder Hydraulic System Oil - Change
980G Wheel Loader Machine Systems Gear Pump (Hydraulic Fan) - Assemble
545 Wheel Skidder Hydraulic and Steering System Lift Cylinder (Decking Blade)
G3500B Engines Emergency Stopping
963B Track-Type Loader Cab Air Filter - Clean/Replace
623F Wheel Tractor-Scraper Machine Systems Steering Link - Remove and Install
515 Wheel Skidder and 525 Wheel Skidder Engine Oil and Filter - Change
D9R Track-Type Tractor Starting Above 0°C (32°F)
623F Wheel Tractor-Scraper Power Train Transfer Gears - Disassemble
623F Wheel Tractor-Scraper Power Train Transfer Gears - Assemble
994D Air System Wheel Loader Air Horn
963B Track-Type Loader Hydraulic System General Information
3046 Engine For Caterpillar Built Machines V-Belts - Remove and Install