Cooling System Pressure Cap - Clean/Replace
The cooling system pressure cap for the machine is located on the top of the expansion tank. The expansion tank is directly above the radiator.
- Remove the cooling system pressure cap slowly in order to relieve the pressure.
- Inspect the cooling system pressure cap for damage, for foreign material, and for deposits.
- Clean the cooling system pressure cap with a clean cloth or replace the cap, if necessary.
- Inspect the condition of the gasket in the cooling system pressure cap. Replace the cap, if necessary.
- Install the cooling system pressure cap.
Show/hide table
Illustration 1 | g00516783 |
Show/hide table
Steam or hot coolant can cause severe burns. Do not loosen the filler cap or the pressure cap on a hot engine. Allow the engine to cool before removing the filler cap or the pressure cap. |
Caterpillar Information System:
515 Wheel Skidder and 525 Wheel Skidder Transmission and Grapple Electronic Control System System Schematic
515 Wheel Skidder and 525 Wheel Skidder Hydraulic System Oil Sample - Obtain
515 Wheel Skidder and 525 Wheel Skidder Transmission and Grapple Electronic Control System Electrical Connector - Inspect
963B Track-Type Loader Radiator Pressure Cap - Clean/Replace
D9R Track-Type Tractor Steering Clutch and Brake Control
3046 Engine For Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
515 Wheel Skidder and 525 Wheel Skidder Hydraulic System Oil Filter - Replace
515 Wheel Skidder and 525 Wheel Skidder Transmission and Grapple Electronic Control System Glossary of Electrical Terms
963B Track-Type Loader Bucket Teeth and Cutting Edges - Inspect/Replace
994D Air System Wheel Loader Air Starting System
515 Wheel Skidder and 525 Wheel Skidder Hydraulic System Oil - Change
994D Air System Wheel Loader Control Valve (Air Tank Drain)
515 Wheel Skidder and 525 Wheel Skidder Engine Oil Level - Check
980G Wheel Loader Machine Systems Gear Pump (Hydraulic Fan) - Assemble
545 Wheel Skidder Hydraulic and Steering System Lift Cylinder (Decking Blade)
G3500B Engines Emergency Stopping
963B Track-Type Loader Cab Air Filter - Clean/Replace
623F Wheel Tractor-Scraper Machine Systems Steering Link - Remove and Install
515 Wheel Skidder and 525 Wheel Skidder Engine Oil and Filter - Change
D9R Track-Type Tractor Starting Above 0°C (32°F)
623F Wheel Tractor-Scraper Power Train Transfer Gears - Disassemble
623F Wheel Tractor-Scraper Power Train Transfer Gears - Assemble
994D Air System Wheel Loader Air Horn
963B Track-Type Loader Hydraulic System General Information