Cylinder Liner - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
C     | 2P-8260     | Cylinder Liner Installation Group     | 1     |
D     | 5P-3975     | Rubber Lubricant     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Check the cylinder liner projection. Refer to Testing and Adjusting, "Cylinder Liner Projection - Inspect".
- Apply Tooling (D) to the O-ring seal. Install O-ring seal (2) in the machined groove on cylinder liner (1) .
Show/hide table
Illustration 1 | g01011451 |
- Lubricate the lower portion of the cylinder liner with clean engine oil. Ensure that the corresponding crankshaft throw is at bottom center. Position the cylinder liner in the cylinder block. Use Tooling (C) to press the cylinder liner in place.
End By: Install the pistons and the connecting rods. Refer to Disassembly and Assembly, "Pistons and Connecting Rods - Install".
Caterpillar Information System:
C12 Marine Engines Cylinder Liner - Remove
C12 Marine Engines Engine Oil Pan - Remove and Install
C12 Marine Engines Camshaft - Install
C12 Marine Engines Camshaft - Remove
C12 Marine Engines Front Cover - Install
C12 Marine Engines Front Cover - Remove
2004/09/01 Improved Flash files are Now Used on RV Applications {7620}
C12 Marine Engines Valve Mechanism Cover - Remove and Install
C12 Marine Engines Accessory Drive - Install
C12 Marine Engines Accessory Drive - Remove
C12 Marine Engines Gear Group (Front) - Install
2004/11/01 New Voltage Regulator for Switchgear Is Now Used {1410}
C12 Marine Engines Pistons and Connecting Rods - Remove
C12 Marine Engines Pistons and Connecting Rods - Disassemble
2004/11/01 New UPS System Controller Boards Are Now Available {1418}
C12 Marine Engines Pistons and Connecting Rods - Assemble
C12 Marine Engines Pistons and Connecting Rods - Install
C12 Marine Engines Connecting Rod Bearings - Remove
C12 Marine Engines Connecting Rod Bearings - Install
C12 Marine Engines Crankshaft Main Bearings - Remove
C11 and C13 Engines for Caterpillar Built Machines Can Not Reach Top Engine RPM
C12 Marine Engines Crankshaft Main Bearings - Install
C12 Marine Engines Crankshaft - Remove
C9 Industrial Engines Electric Starting Motor