Front Cover - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 9S-3263     | Thread Lock Compound     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install the housing cover gasket.
- Install the following items on the front housing: front cover (4), bolts (2) and bolt (3) .
Show/hide table
Illustration 1 | g01107700 |
Note: Bolt (3) is a through bolt. Apply Tooling (A) to the threads prior to installation.
- Install studs (1) .
End By:
- Install the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Install".
- Install the crankshaft front seal. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Install".
- Install the alternator. Refer to Disassembly and Assembly, "Alternator - Remove and Install".
Caterpillar Information System:
C12 Marine Engines Front Cover - Remove
2004/09/01 Improved Flash files are Now Used on RV Applications {7620}
C12 Marine Engines Valve Mechanism Cover - Remove and Install
C12 Marine Engines Accessory Drive - Install
C12 Marine Engines Accessory Drive - Remove
C12 Marine Engines Gear Group (Front) - Install
2004/11/01 New Voltage Regulator for Switchgear Is Now Used {1410}
C12 Marine Engines Gear Group (Front) - Remove
390F MHPU Mobile Hydraulic Power Unit Cooling System Coolant Extender (ELC) - Add
C12 Marine Engines Vibration Damper and Pulley - Remove and Install
C12 Marine Engines Flywheel - Remove and Install
C12 Marine Engines Expansion Tank - Remove and Install
C12 Marine Engines Camshaft - Remove
C12 Marine Engines Camshaft - Install
C12 Marine Engines Engine Oil Pan - Remove and Install
C12 Marine Engines Cylinder Liner - Remove
C12 Marine Engines Cylinder Liner - Install
C12 Marine Engines Pistons and Connecting Rods - Remove
C12 Marine Engines Pistons and Connecting Rods - Disassemble
2004/11/01 New UPS System Controller Boards Are Now Available {1418}
C12 Marine Engines Pistons and Connecting Rods - Assemble
C12 Marine Engines Pistons and Connecting Rods - Install
C12 Marine Engines Connecting Rod Bearings - Remove
C12 Marine Engines Connecting Rod Bearings - Install