Front Cover - Remove
Removal Procedure
Start By:
- Remove the alternator. Refer to Disassembly and Assembly, "Alternator - Remove and Install".
- Remove the crankshaft front seal. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Remove".
- Remove the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove studs (1) .
Show/hide table
Illustration 1 | g01107700 |
- Remove bolts (2) .
- Remove bolt (3) .
- Remove cover (4) .
- Remove the housing cover gasket.
Caterpillar Information System:
2004/09/01 Improved Flash files are Now Used on RV Applications {7620}
C12 Marine Engines Valve Mechanism Cover - Remove and Install
C12 Marine Engines Accessory Drive - Install
C12 Marine Engines Accessory Drive - Remove
C12 Marine Engines Gear Group (Front) - Install
2004/11/01 New Voltage Regulator for Switchgear Is Now Used {1410}
C12 Marine Engines Gear Group (Front) - Remove
390F MHPU Mobile Hydraulic Power Unit Cooling System Coolant Extender (ELC) - Add
C12 Marine Engines Vibration Damper and Pulley - Remove and Install
C12 Marine Engines Flywheel - Remove and Install
C12 Marine Engines Expansion Tank - Remove and Install
C12 Marine Engines Aftercooler - Install
C12 Marine Engines Front Cover - Install
C12 Marine Engines Camshaft - Remove
C12 Marine Engines Camshaft - Install
C12 Marine Engines Engine Oil Pan - Remove and Install
C12 Marine Engines Cylinder Liner - Remove
C12 Marine Engines Cylinder Liner - Install
C12 Marine Engines Pistons and Connecting Rods - Remove
C12 Marine Engines Pistons and Connecting Rods - Disassemble
2004/11/01 New UPS System Controller Boards Are Now Available {1418}
C12 Marine Engines Pistons and Connecting Rods - Assemble
C12 Marine Engines Pistons and Connecting Rods - Install
C12 Marine Engines Connecting Rod Bearings - Remove