1983/05/09 Caterpillar


Installation Of Bearing For Connecting Rod Piston Pin{1219}

Usage:


All 3200 Series Engines With Tapered Connecting Rods

Connecting rods with a taper on the piston end are currently used in 3200 Series Engines. The sides of these tapered connecting rods are machined at the factory after the piston pin bearing is installed. Because of this, there is no chamfer on the ends of the pin bore in the connecting rod.

If replacement of the pin bore bearing must be made, it will be necessary to grind a chamfer on the ends of the bore for easier installation of the pin bore bearings. See the illustration.


Dimensions for chamfer.

Caterpillar Information System:

1983/05/09 Balancer Shaft And Gear Now Available Separately{1220}
1983/05/09 New Fuel Nozzle Adapters Used{1106}
1983/05/09 New Turbocharger Has Thicker Mounting Flange To Prevent Breakage{1052}
1983/05/09 Change 6V3060 EGR Testers To LES Testers{0651,1080}
1983/05/09 New Specification For Adjustment Of Jacobs Engine Brake{1119}
1983/05/09 Change Made To FT1535 Idler Bearing Puller{0621,4167}
1983/05/09 New Service Tools Available{0600}
1983/04/25 Remove Plastic Plug From Fuel Transfer Pump{1256}
1983/04/25 New Gasket And Cover Used On Governors{1264}
1983/04/25 Changes To Valve Clearance Settings{0374,1105,1250}
1983/04/25 Breather Now Made Of Steel Instead Of Plastic{5163,4059,4114,3154,4003}
1983/04/25 Valve Spring Retainers Now Have Thicker Flanges{1108}
1983/05/09 Use 6V7777 Spacer With 9S6030 Front Oil Seal Installer{1160,0622}
1983/05/09 New Lower Radiator Hose{1380,1353}
1983/05/09 New Fuel Setting Information{0374,1257,1286}
1983/05/09 New Piston Ring Group Available For Higher Horsepower Applications{1215,1214,1213,1226}
1983/05/16 New Specification For Clearance Between Fuel Rack Slot And Cross Link{1257}
1983/05/16 Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16 Selection Of The Correct Battery For Use With Diagnostic Tools{1401,0650}
1983/05/16 Reuse Of Engine Bearings{1230}
1983/05/16 Increased Oil Flow To Front Bearings{3300}
1983/05/23 Double Lip Crankshaft Seal Helps Stop Oil Leakage{1161,3300}
1983/05/23 Use The 6V4930 Battery Load Tester To Test Batteries{0651}
1983/05/23 List Of Changes To BrakeSavers{1155,1159}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.