New Turbocharger Has Thicker Mounting Flange To Prevent Breakage{1052}
Usage:
3208 Industrial, Truck And Generator Set Engines Equipped With A Turbocharger
Description of Change: New turbocharger groups are now used on the above engines. These new groups have new center housing assemblies with thicker mounting flanges. The thicker mounting flanges will decrease the possibility of breakage when the turbocharger is fastened to the engine. Because of the thicker flanges it is necessary to use longer bolts.
Reports show that some of the former housings have cracked when they were fastened to the engine.
Adaptable As: The new parts, when used together, are direct replacements for the former parts as shown in the chart.
Caterpillar Information System:
1983/05/09 Change 6V3060 EGR Testers To LES Testers{0651,1080}
1983/05/09 New Specification For Adjustment Of Jacobs Engine Brake{1119}
1983/05/09 Change Made To FT1535 Idler Bearing Puller{0621,4167}
1983/05/09 New Service Tools Available{0600}
1983/04/25 Remove Plastic Plug From Fuel Transfer Pump{1256}
1983/04/25 New Gasket And Cover Used On Governors{1264}
1983/04/25 Changes To Valve Clearance Settings{0374,1105,1250}
1983/04/25 Breather Now Made Of Steel Instead Of Plastic{5163,4059,4114,3154,4003}
1983/04/25 Valve Spring Retainers Now Have Thicker Flanges{1108}
1983/04/18 New Reconditioning Specifications For Cylinders Decrease Piston Scuffing And Seizure {0374,1223,1216,1201}
1983/04/18 SIRS Index Contains Product Update Information {7570,0374}
1983/04/18 Cutting Threads For Caterpillar Taperlock Studs {7553}
1983/05/09 New Fuel Nozzle Adapters Used{1106}
1983/05/09 Balancer Shaft And Gear Now Available Separately{1220}
1983/05/09 Installation Of Bearing For Connecting Rod Piston Pin{1219}
1983/05/09 Use 6V7777 Spacer With 9S6030 Front Oil Seal Installer{1160,0622}
1983/05/09 New Lower Radiator Hose{1380,1353}
1983/05/09 New Fuel Setting Information{0374,1257,1286}
1983/05/09 New Piston Ring Group Available For Higher Horsepower Applications{1215,1214,1213,1226}
1983/05/16 New Specification For Clearance Between Fuel Rack Slot And Cross Link{1257}
1983/05/16 Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16 Selection Of The Correct Battery For Use With Diagnostic Tools{1401,0650}
1983/05/16 Reuse Of Engine Bearings{1230}
1983/05/16 Increased Oil Flow To Front Bearings{3300}