Engine Design
C11
Show/hide table
 | |
| 图 1 | g01193938 |
(A) 排气阀 (B) 进气阀 | |
缸径 ... 130
mm
(5.12 in)
冲程 ... 140
mm
(5.51 in)
排量 ... 11.1
L
(680 cu in)
气缸布置 ... 直列式
每气缸气门数 ... 4
为检查发动机气门间隙的设定值，发动机必须是冷机且发动机必须停止。
发动机气门间隙
- 进气 ... 0.38
± 0.08 mm
(0.015 ± 0.003 in)- 排气 ... 0.64 ± 0.08 mm
(0.025 ± 0.003 in) - 排气 ... 0.64 ± 0.08 mm
燃烧类型 ... 直喷式
点火顺序 ... 1-5-3-6-2-4
曲轴旋转方向是通过从发动机飞轮端观察来确定的。 曲轴旋转 ... 逆时针
注: 发动机的前端是指与发动机飞轮端相对的一端。 发动机左右侧是通过从发动机飞轮端观察来确定的。 1 号缸为前缸。
Caterpillar Information System:
C15 and C18 Petroleum Engines Engine Design
G3612 and G3616 Engines Refill Capacities and Recommendations
C9 Marine Engines and C9 Marine Generator Sets Vibration Damper
C9 Marine Engines and C9 Marine Generator Sets Crankshaft Pulley
2004/08/01 Improved Water Temperature Regulators Are Now Used {1355}
2004/08/01 New Water Temperature Regulators Are Now Used {1355}
2004/08/16 Improved Water Temperature Regulators Are Now Used {1355}
2004/08/01 Large Engine Cylinder Head Groups {1100}
2004/11/01 A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01 A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15 A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
G3612 and G3616 Engines Cooling System Coolant (NGEC) - Change
C9 Engines for Caterpillar Built Machines Engine Design
3306C Engines for Caterpillar Built Machines Charging System - Test
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies User Interface
C15 and C18 Industrial Engines Exhaust Manifold - Remove and Install - Single Turbocharger
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Troubleshooting
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Telemetry Parameters
2004/08/01 New Circuit Breakers Are Now Being Used {4461}
C15 and C18 Industrial Engines Exhaust Manifold - Remove and Install - Dual Turbochargers
3500B and 3500C Generator Set Engines Fuel System Operation
C15 and C18 Industrial Engines Turbocharger - Remove - Single Turbocharger
C15 and C18 Industrial Engines Turbocharger - Install - Single Turbocharger
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Valve Mechanism