Crankshaft Pulley
Show/hide table
 | |
| Illustration 1 | g01094709 |
(1) Bolt
- Tighten the bolts to the following torque. ... 190 ± 30 N·m (140 ± 22 lb ft)
Caterpillar Information System:
2004/08/01 Improved Water Temperature Regulators Are Now Used {1355}
2004/08/01 New Water Temperature Regulators Are Now Used {1355}
2004/08/16 Improved Water Temperature Regulators Are Now Used {1355}
2004/08/01 Large Engine Cylinder Head Groups {1100}
2004/11/01 A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01 A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15 A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
G3612 and G3616 Engines Cooling System Coolant (NGEC) - Change
G3500B Engines Engine Control Panel - Optional
G3612 and G3616 Engines Reference Material
2004/08/16 Use the Correct Front Housing Bolts {1151}
2004/08/01 Use the Correct Front Housing Bolts {1151}
C9 Marine Engines and C9 Marine Generator Sets Vibration Damper
G3612 and G3616 Engines Refill Capacities and Recommendations
C15 and C18 Petroleum Engines Engine Design
C9 Engines for Caterpillar Built Machines Engine Design
C9 Engines for Caterpillar Built Machines Engine Design
3306C Engines for Caterpillar Built Machines Charging System - Test
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies User Interface
C15 and C18 Industrial Engines Exhaust Manifold - Remove and Install - Single Turbocharger
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Troubleshooting
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Telemetry Parameters
2004/08/01 New Circuit Breakers Are Now Being Used {4461}
C15 and C18 Industrial Engines Exhaust Manifold - Remove and Install - Dual Turbochargers