Engine Design
Show/hide table
图 1 | g01096864 |
气缸和气门的位置 (A) 进气门 (B) 排气门 (C) 发动机飞轮端 |
缸径 ...
冲程 ...
排量 ...
气缸布置 ... 直列式
每气缸气门数 ... 4
以下数值是进气门间隙的调定值。 ...
以下数值是进气门间隙的调定值。 ...
发火次序(喷油顺序) ... 1、5、3、6、2、4
曲轴旋转 ... 逆时针
注: 发动机的前端与飞轮端相对。 发动机的左侧和右侧是指从飞轮端观看发动机时。 1 号气缸是最前端的气缸。
Caterpillar Information System:
G3612 and G3616 Engines Refill Capacities and Recommendations
C9 Marine Engines and C9 Marine Generator Sets Vibration Damper
C9 Marine Engines and C9 Marine Generator Sets Crankshaft Pulley
2004/08/01 Improved Water Temperature Regulators Are Now Used {1355}
2004/08/01 New Water Temperature Regulators Are Now Used {1355}
2004/08/16 Improved Water Temperature Regulators Are Now Used {1355}
2004/08/01 Large Engine Cylinder Head Groups {1100}
2004/11/01 A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01 A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15 A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
G3612 and G3616 Engines Cooling System Coolant (NGEC) - Change
G3500B Engines Engine Control Panel - Optional
C9 Engines for Caterpillar Built Machines Engine Design
C9 Engines for Caterpillar Built Machines Engine Design
3306C Engines for Caterpillar Built Machines Charging System - Test
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies User Interface
C15 and C18 Industrial Engines Exhaust Manifold - Remove and Install - Single Turbocharger
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Troubleshooting
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Telemetry Parameters
2004/08/01 New Circuit Breakers Are Now Being Used {4461}
C15 and C18 Industrial Engines Exhaust Manifold - Remove and Install - Dual Turbochargers
3500B and 3500C Generator Set Engines Fuel System Operation
C15 and C18 Industrial Engines Turbocharger - Remove - Single Turbocharger
C15 and C18 Industrial Engines Turbocharger - Install - Single Turbocharger