Bucket Loading Hauling Units
Show/hide table
 | |
| Illustration 1 | g00101770 |
- To reduce the loader turning and the travel distance, position the hauling unit at an angle to the material that is being loaded.
- The travel distance should be long enough so that the bucket can reach the lift height without slowing the movement of the loader.
- Position the loader in order to dump the load in the center of the hauling unit body. If the length of the hauling unit body is two times the length of the bucket, load the material into the hauling unit body from the front to the rear.
- Push the bucket tilt lever forward in order to dump the load from the bucket.
- Shake the bucket in order to loosen sticky material. Move the bucket tilt lever back and forth in quick motions. Allow the tilt arms to strike the stops.
- Move the bucket tilt lever to the TILT BACK detent position.
Show/hide table
| NOTICE |
|---|
Striking the stops unnecessarily and repetitively can result in accelerated wear and high maintenance cost of the loader linkage. |
- Before you lower the bucket, make sure that the hauling unit is not under the bucket.
- Lower the bucket while you position the loader for the next load.
Caterpillar Information System:
Caterpillar Monitoring System General Information
914G Wheel Loader Bulldozing and Dumping
IT14G Integrated Toolcarrier Secondary Steering
IT14G Integrated Toolcarrier Parking Brake
IT14G Integrated Toolcarrier Changing Speed and Direction
IT14G Integrated Toolcarrier Machine Operation Information
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Tank (Right Side) - Install
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Tank (Right Side) - Remove
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Tank (Left Side) - Install
633E Series II Wheel Tractor-Scraper Hydraulic System Ejector Cylinder
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Tank (Left Side) - Remove
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Tank (Center) - Install
914G Wheel Loader Bucket Loading from a Bank
994D Wheel Loader Automatic Lubrication System Air System
914G Wheel Loader Bucket Positioner
621F Wheel Tractor-Scraper Starting Above 0°C (32°F)
994D Wheel Loader Automatic Lubrication System Electrical System
994D Wheel Loader Automatic Lubrication System Lubrication System
844 Wheel Dozer Model View Illustrations
621F and 627F Wheel Tractor-Scrapers Hydraulic System Pressure Switch (Ejector)
Caterpillar Monitoring System Component Description
627F Wheel Tractor-Scraper Engine Starting
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Steering Frame Lock - Separate and Connect
623F Wheel Tractor-Scraper Hydraulic System Oil Filter and Bypass Valve