Changing Speed and Direction
Changing from low speed to high speed at full engine speed is possible. Directional changes at full engine speed are possible. However, if you are changing direction, reducing the machine speed and/or braking the machine is recommended. This will provide operator comfort and the maximum service life of the power train components. Keep a loaded bucket low to the ground. Stop the machine in order to avoid an unstable machine.
- Lower the engine speed with the accelerator pedal (2) .
Show/hide table
Illustration 1 | g00392502 |
- Push the brake pedals (1) downward in order to slow the machine. Push the brake pedals downward in order to stop the machine.
- Move the direction control lever (3) to the desired direction or move the direction control switch (4) (if equipped) to the desired direction.
Show/hide table
Illustration 2 | g00392503 |
Show/hide table
Illustration 3 | g00392505 |
- Move the speed selector switch to the desired speed.
Show/hide table
Illustration 4 | g00392595 |
- Release the brake pedals.
- Increase the engine speed with the pedal.
Note: If the machine is equipped with a direction control switch, the direction control that is not being used must be in the NEUTRAL position. In order to use the other direction control, you must put the direction control that is being used in NEUTRAL before you use the other direction control.
Caterpillar Information System:
IT14G Integrated Toolcarrier Machine Operation Information
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Tank (Right Side) - Install
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Tank (Right Side) - Remove
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Tank (Left Side) - Install
633E Series II Wheel Tractor-Scraper Hydraulic System Ejector Cylinder
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Tank (Left Side) - Remove
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Tank (Center) - Install
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Tank (Center) - Remove
Caterpillar Monitoring System Setup Mode
Caterpillar Monitoring System Units Mode
994D Wheel Loader Steering System Filter (Steering Pump Case Drain)
994 Wheel Loader Power Train Transmission Lubrication
IT14G Integrated Toolcarrier Parking Brake
IT14G Integrated Toolcarrier Secondary Steering
914G Wheel Loader Bulldozing and Dumping
Caterpillar Monitoring System General Information
914G Wheel Loader Bucket Loading Hauling Units
914G Wheel Loader Bucket Loading from a Bank
994D Wheel Loader Automatic Lubrication System Air System
914G Wheel Loader Bucket Positioner
621F Wheel Tractor-Scraper Starting Above 0°C (32°F)
994D Wheel Loader Automatic Lubrication System Electrical System
994D Wheel Loader Automatic Lubrication System Lubrication System
844 Wheel Dozer Model View Illustrations