Bulldozing and Dumping
Bulldozing
Show/hide table
Illustration 1 | g00391437 |
Keep the bottom of the bucket parallel to the ground when you are bulldozing.
Dumping
Show/hide table
Illustration 2 | g00391438 |
To control dumping, move the tilt control lever to the DUMP position. Then, return the tilt control lever to the HOLD position. Repeat this procedure until the bucket is empty.
Dump the bucket when the wind is moving toward the front of the machine. This will help to keep dust away from the engine. This will also help to maintain visibility.
To achieve the maximum angle for dumping, use the bucket stops.
Show/hide table
NOTICE |
---|
Striking the stops unnecessarily and repetitively can result in accelerated wear and high maintenance cost of the loader linkage. |
Caterpillar Information System:
IT14G Integrated Toolcarrier Secondary Steering
IT14G Integrated Toolcarrier Parking Brake
IT14G Integrated Toolcarrier Changing Speed and Direction
IT14G Integrated Toolcarrier Machine Operation Information
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Tank (Right Side) - Install
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Tank (Right Side) - Remove
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Tank (Left Side) - Install
633E Series II Wheel Tractor-Scraper Hydraulic System Ejector Cylinder
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Tank (Left Side) - Remove
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Tank (Center) - Install
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Tank (Center) - Remove
Caterpillar Monitoring System Setup Mode
Caterpillar Monitoring System General Information
914G Wheel Loader Bucket Loading Hauling Units
914G Wheel Loader Bucket Loading from a Bank
994D Wheel Loader Automatic Lubrication System Air System
914G Wheel Loader Bucket Positioner
621F Wheel Tractor-Scraper Starting Above 0°C (32°F)
994D Wheel Loader Automatic Lubrication System Electrical System
994D Wheel Loader Automatic Lubrication System Lubrication System
844 Wheel Dozer Model View Illustrations
621F and 627F Wheel Tractor-Scrapers Hydraulic System Pressure Switch (Ejector)
Caterpillar Monitoring System Component Description
627F Wheel Tractor-Scraper Engine Starting