Bucket Positioner
Show/hide table
Use caution to avoid possible personal injury when adjusting the bucket positioner. Stop the engine and lower all equipment to relieve the hydraulic pressure. Engage the parking brake and block the tires to prevent sudden movement of the machine. Keep unauthorized personnel off the machine. |
- Start the engine. Lower the bucket to the ground.
- Position the bucket at the desired angle to the ground. Turn the engine start switch key to the OFF position and remove the engine start switch key. Move the bucket tilt lever to the TILT BACK detent position.
- Loosen the four bolts (1) that clamp the tube assembly (2) of the switch. Move the tube assembly down the cylinder in order to increase the digging angle. Move the tube assembly up the cylinder in order to decrease the digging angle.
Show/hide table
Illustration 1 | g00392409 |
- To test the adjustment, start the engine. Raise the bucket. Move the bucket tilt lever to the TILT BACK detent position.
- When the bucket reaches the preset digging angle, the bucket tilt lever should return to the HOLD position.
Caterpillar Information System:
994D Wheel Loader Automatic Lubrication System Air System
914G Wheel Loader Bucket Loading from a Bank
914G Wheel Loader Bucket Loading Hauling Units
Caterpillar Monitoring System General Information
914G Wheel Loader Bulldozing and Dumping
IT14G Integrated Toolcarrier Secondary Steering
IT14G Integrated Toolcarrier Parking Brake
IT14G Integrated Toolcarrier Changing Speed and Direction
IT14G Integrated Toolcarrier Machine Operation Information
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Tank (Right Side) - Install
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Tank (Right Side) - Remove
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Tank (Left Side) - Install
621F Wheel Tractor-Scraper Starting Above 0°C (32°F)
994D Wheel Loader Automatic Lubrication System Electrical System
994D Wheel Loader Automatic Lubrication System Lubrication System
844 Wheel Dozer Model View Illustrations
621F and 627F Wheel Tractor-Scrapers Hydraulic System Pressure Switch (Ejector)
Caterpillar Monitoring System Component Description
627F Wheel Tractor-Scraper Engine Starting
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Steering Frame Lock - Separate and Connect
623F Wheel Tractor-Scraper Hydraulic System Oil Filter and Bypass Valve
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Axle Housing - Disassemble
844 Wheel Dozer Lift Control
3054 Engine Engine Oil Relief Valve