|
FLOAT (1) - Push the control lever forward into the detent. The blade will lower to the ground. The blade will follow along the contour of the ground. The control lever will remain in the detent until the control lever is manually moved out of the detent.
|
|
LOWER (2) - Push the control lever forward in order to lower the blade. The control lever will return to the HOLD position when the control lever is released.
|
|
HOLD (3) - The control lever will return to the HOLD position when the control lever is released from the RAISE position or from the LOWER position. The blade will remain in the selected position.
|
|
RAISE (4) - Pull back on the control lever in order to raise the blade. The control lever will return to the HOLD position when the control lever is released.
|
