Piston Cooling Jets - Remove and Install
Removal Procedure
Start By:
- Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolt (2) and piston cooling jet (1) from each cylinder.
Show/hide table
Illustration 1 | g01081720 |
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position piston cooling jet (1) in the cylinder block. Ensure that piston cooling jet (1) is seated properly. Install bolt (2). Tighten the bolt to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Show/hide table
Illustration 2 | g01081720 |
End By: Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Caterpillar Information System:
G3600 Engines Unburned Gas - Purge
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Wiring Information
2004/12/27 Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
C7 Marine Engines Engine Oil Pan - Remove and Install
C7 Marine Engines Camshaft Bearings - Remove and Install
C7 Marine Engines Camshaft Gear - Remove and Install
C7 Marine Engines Camshaft - Install
C7 Marine Engines Camshaft - Remove
C7 Marine Engines Lifter Group - Remove and Install
3406E and 3456 Generator Set Engines E059 Low Engine Coolant Level Warning
C15 On-highway Engines Water Temperature Regulator Housing - Remove and Install
C7 Marine Engines Cylinder Head - Install
C18 Marine Generator Set Engines Replacing the ECM
C7 Marine Engines Pistons and Connecting Rods - Remove
C7 Marine Engines Pistons and Connecting Rods - Disassemble
3406E and 3456 Generator Set Engines CID 0248 FMI 09 CAT Data Link communications
3126B Petroleum Engine Engine Wiring Information
3126B Petroleum Engine Customer Passwords
3126B Petroleum Engine Factory Passwords
3126B Petroleum Engine Flash Programming
C7 Marine Engines Pistons and Connecting Rods - Assemble
3126B Engine for Caterpillar Built Machines Alternator - Charging Problem
2004/09/01 Internal Components for Remanufactured Injectors are Now Coated for Increased Service Life {1290}
C7 Marine Engines Pistons and Connecting Rods - Install