C7 Marine Engines Caterpillar


Pistons and Connecting Rods - Disassemble

Usage:

C7 C7B

Disassembly Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-6683     Ring Expander     1    
B     1P-1861     Retaining Ring Pliers     1    

Start By:

  1. Remove the pistons and the connecting rods. Refer to Disassembly and Assembly, "Pistons and Connecting Rods - Remove".


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.





    Illustration 1g01081595

  1. Use Tooling (B) in order to remove retaining rings (2). Remove piston pin (4) and separate piston (1) from connecting rod (3) .



    Illustration 2g01081596

  1. Use Tooling (A) in order to remove piston rings (5) .
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.