Water Temperature Regulator
Show/hide table
 | |
| Illustration 1 | g01115619 |
Start to open temperature of the water temperature regulator ... 86 °C to 89 °C (187 °F to 192 °F)
Fully open temperature of the water temperature regulator ... 97 °C (207 °F)
(1) Closed dimension of the water temperature regulator ... 29.5 ± 0.5 mm (1.16 ± 0.02 inch)
(2) Minimum stroke of the water temperature regulator at fully open temperature ... 8.0 mm (0.32 inch)
Caterpillar Information System:
G3520C and G3520E Engines Thermostatic Valve
C18 Petroleum Generator Sets Engine Description
2004/03/01 Listing of Deutsch Connector Components {7553}
G3600 Engines Cooling System Coolant Level - Check
G3520C and G3520E Engines Thermostatic Valve
G3300 Engines Engine - Clean
3126B Petroleum Engine Belt Tension Chart
C18 Generator set and C18 Marine Engines Fuel Transfer Pump - Install
C18 Generator set and C18 Marine Engines Fuel Transfer Pump - Remove
3126B Petroleum Engine Engine Crankcase Pressure (Blowby) - Test
G3600 Engines Crankshaft Vibration Damper - Inspect
C13, C15, and C18 Generator Set Engines Ether Injection System - Test
C13, C15, and C18 Generator Set Engines Engine Shutdown Switch Circuit - Test
2004/05/01 New Piston For Marine Auxiliary And Industrial Engines Reduces Light Load Oil Consumption {1214}
C13, C15, and C18 Generator Set Engines Digital Sensor Supply Circuit - Test
3406E, C-10 and C-12 On-highway Engines System Overview
3412E Petroleum Engine Engine Cranks but Will Not Start
3126B Petroleum Engine Engine Oil Temperature Is Too High
3126B Petroleum Engine Excessive Black Smoke
3126B Petroleum Engine Excessive Fuel Consumption
C18 Generator Set Plate Locations and Film Locations
3126B Petroleum Engine Low Power/Poor or No Response to Throttle
3406E, C-10 and C-12 On-highway Engines Sensors and Electrical Connectors
C15 Petroleum Engines Water Temperature Regulator - Remove and Install