G3516B Engines Caterpillar


MID 036 - CID 0145 - FMI 04 12 Volt DC Power Supply short to ground

Usage:

G3516B 7EZ
Conditions Which Generate This Code:

The Electronic Control Module (ECM) has been powered for at least five seconds. The 12 volt sensor supply voltage becomes less than 11 VDC for at least one second.

System Response:

If the engine is running, the fuel is shut off. The shutdown output is activated. The code is logged.

Possible Performance Effect:

The engine is shut down or the engine will not start.

Troubleshooting:

Test Step 1. Perform the following diagnostic procedure: "Engine Speed/Timing Sensor"

Results:

  • OK - STOP

Caterpillar Information System:

G3516B Engines MID 036 - CID 0145 - FMI 03 12 Volt DC Power Supply short to +batt
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Water Pump - Install
3412E and C30 Marine Engines Basic Engine
2004/03/01 New High Efficiency Oil Filters are Now Available {1308}
2004/03/01 New High Efficiency Oil Filters are Now Available {1308}
2004/03/22 New High Efficiency Oil Filters are Now Available {1308}
3500B and 3500C Marine Engines Engine Harness - Rigid Wiring Harness
C13, C15, and C18 Generator Set Engines General Information
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Water Pump - Remove
G3516B Engines Diagnostic Codes
C7 Engines for Caterpillar Built Machines Electronic Unit Injector - Test
3500B Engines Valve Cover Base - Remove and Install
C11 and C13 Petroleum Engines Fan Drive Bearing - Replace
3126B Petroleum Engine Belt Tensioner - Inspect
C13, C15, and C18 Generator Set Engines System Configuration Parameters
3126B Marine Engines Injection Actuation Pressure Sensor - Test
C12 Marine Engines Engine Oil Level Gauge - Calibrate
G3516B Engines MID 036 - CID 1719 - FMI 12 Generator Output Power Sensor malfunction
EMCP3 Voltage and Frequency Adjustment
G3408 and G3412 Engines Engine Oil and Filter - Change
D7G Series 2 and D7G Series II Track-Type Tractors Horn - Test
2004/04/01 Replacement of the Injection Actuation Pressure Control Valve {5051}
C-15 Petroleum Engine Cooling System
2004/05/01 Improved Water Temperature Regulator {1355}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.