Fuel Transfer Pump - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A (1)     | 218-8171     | 螺栓     | 1     |
Show/hide table
( 1 ) | 218-8172 燃油输油泵和安装件总成 部分 |
开始:
- 拆下单体喷油器液压泵。 请参阅拆解和组装, "单体喷油器液压泵 - 拆卸"。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将单体喷油器液压泵竖直安装到工作台上。 燃油输送泵应当竖直朝上。
注: 未能保持在垂直位置将造成内部部件错位。
注: 需要用工具 (A) 来更换燃油输油泵。
Show/hide table
图 1 | g01032028 |
- 拆下将燃油输送泵 (4) 固定到单体喷油器液压泵 (1) 上的螺栓 (5) 。
- 首先拆下位于泵左上角的螺栓 (2) 。
- 将工具 (A) 安装到泵的左上角中。 将工具 (A) 拧至扭矩为 10 N·m (89 lb in)。
注: 不要向螺栓施加过大扭矩。
注: 工具 (A) 有一个尺寸不足的螺栓头。 必须安装工具 (A) 以防单体喷油器液压泵壳体在维修中分离。
- 将螺栓 (3) 从燃油输送泵 (4) 上拆下。
- 将燃油输送泵 (4) 从单体喷油器液压泵 (1) 上拆下。
Caterpillar Information System:
C9 Marine Engines and C9 Marine Generator Sets Coolant Level Sensor - Remove and Install
3516B HD Generator Set After Starting Engine
EMCP3 Electronic Control Module (Generator Set)
EMCP3 Setpoint Programming
C9 Marine Engines and C9 Marine Generator Sets Electric Starting Motor - Remove and Install
C9 Marine Auxiliary and Generator Set Engines Cold Weather Starting
C9 Marine Auxiliary and Generator Set Engines Starting the Engine
C15 and C18 Petroleum Generator Sets Before Starting Engine
3516B HD Generator Set Cold Weather Operation
3408C, 3412C and 3412D High Performance Marine Engines Air Inlet and Exhaust System
C9 Marine Engines and C9 Marine Generator Sets Engine Oil Pump - Install
C9 Marine Engines and C9 Marine Generator Sets Engine Oil Pump - Remove
C9 Engine For Caterpillar Built Machines Fuel Transfer Pump - Install
795F and 795F AC XQ Off-Highway Truck Steering System Pressure Sensor (Steering Accumulator)
Electronic Modular Control Panel II (EMCP II) General Information
C3.3 Industrial Engine Water Pump - Remove
3406E Marine Engine Gear Group (Front) - Remove
3456 Generator Sets Generator Lead Connections
584 and 584HD Forwarders Guards - Operator Protection
G3500 Engines Speed Sensor
Welding Repair of Motor Grader Frame {0679, 7051} Welding Repair of Motor Grader Frame {0679, 7051}
G3500 Engines Air Starting Motor - Malfunction
G3500 Engines Coolant Level Sensor - Coolant Level Switch
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector