Valve Mechanism Cover - Remove and Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
Illustration 1 | g01146180 |
- Remove bolts (2).
- Remove valve mechanism cover (1) and seal (3) from valve cover base (4).
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 4C-9612 | Silicone Sealant | - |
- Install seal (3) in valve mechanism cover (1). Apply Tooling (A) on both sides of the seal joint.
- Position valve mechanism cover (1) on valve cover base (4) and install bolts (2) finger tight.
Show/hide table
Illustration 3 g01029580 Bolt tightening sequence for the valve mechanism cover - Tighten the bolts for the valve mechanism cover in a numerical sequence to a torque of
28 ± 7 N·m (21 ± 5 lb ft) .
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
Illustration 2 | g01146180 |
Caterpillar Information System:
C9 Marine Engines and C9 Marine Generator Sets Front Cover - Install
C9 Marine Engines and C9 Marine Generator Sets Front Cover - Remove
3412C Generator Set Cooling System Coolant Sample (Level 2) - Obtain
C32 Petroleum Generator Sets Burn Prevention
C9 Marine Engines and C9 Marine Generator Sets Engine Oil Filter Base - Install
C9 Marine Engines and C9 Marine Generator Sets Engine Oil Filter Base - Remove
3516B HD Generator Set Generator Set - Test
C9 Marine Engines and C9 Marine Generator Sets Water Pump - Assemble
C9 Marine Engines and C9 Marine Generator Sets Water Pump - Disassemble
2003/12/01 Improved Auxiliary Drive Coupling {3279}
2003/10/01 A New Cylinder Head Group For G3408 Engines {1100}
EMCP3 General Information
3508, 3512, and 3516 Generator Sets Cooling System Coolant Sample (Level 1) - Obtain
3508, 3512, and 3516 Generator Sets Cooling System Coolant Sample (Level 2) - Obtain
2003/11/01 New Oil Pan and Integral Seal {1302, 1302, 1302}
2003/11/01 New Seal for the Front Housing {1151}
EMCP3 Real Time Clock Programming
3408C, 3412C and 3412D High Performance Marine Engines Cooling System
EMCP3 Electrical Connector - Inspect
EMCP3 Typical Generator Abbreviations
EMCP3 External Potential Transformer Connections
EMCP3 Speed Sensor (Engine) - Adjust
EMCP3 Electronic Control Module (Generator Set) - Replace
3408C, 3412C and 3412D High Performance Marine Engines Engine Valve Lash - Inspect/Adjust