Crankshaft Rear Seal - Remove
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件描述 | 数量 |
A | 1U-7600 | 滑锤拉拔器 | 1 |
B | - | 撬杆 | 1 |
C | 5P-7318 | 承磨衬套破坏工具总成 | 1 |
开始:
- 拆下飞轮。 请参阅拆解和组装, "飞轮 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 使用工具 (B) 撬动承磨衬套 (2) 的密封唇周围。
- 使用小型钻孔机在曲轴后密封 (1) 中钻出不少于三个的孔。
- 使用工具 (A) 拆下曲轴后密封 (1)。
- 如有必要,使用工具 (C) 拆下承磨衬套 (2) 。
注: 必须同时更换曲轴后密封和承磨衬套。 一旦曲轴后密封与耐磨衬套分开,不得再次使用这些部件。
Show/hide table
图 1 | g01007851 |
注: 确保不要用工具 (B) 损坏飞轮壳。
注: 如果承磨衬套开始从曲轴上滑脱,请转至步骤 2。
Caterpillar Information System:
C15 and C18 Petroleum Generator Sets Generator - Dry
2003/07/01 New Fractured Connecting Rod Has Been Released {1218}
2003/09/01 New Recommended Maintenance Intervals for Coolant and Thermostat Regulators {1350, 1355, 1395}
C4.4 Industrial Engine Engine Air Cleaner Service Indicator - Inspect
3456 Generator Sets Voltage Connections
C7 Engines for Combat and Tactical Vehicles Engine Oil Level - Check
C7 Engines for Combat and Tactical Vehicles Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C7 Engines for Combat and Tactical Vehicles Cooling System Coolant Extender (ELC) - Add
C7 Engines for Combat and Tactical Vehicles Cooling System Coolant (ELC) - Change
2003/07/07 Optional High Efficiency Filters Are Now Available {3004, 5068}
C7 Engines for Combat and Tactical Vehicles Cooling System Coolant (DEAC) - Change
C7 Engines for Combat and Tactical Vehicles Belt - Inspect
C15 On-highway Engine Crankshaft Rear Seal - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Troubleshooting
C9 Urban Transit Bus Engine Engine Oil and Filter - Change
C15 On-highway Engine Turbocharger
C15 On-highway Engine Air Lines
3114, 3116, and 3126 Engines for Caterpillar Built Machines Camshaft - Install
3456 Generator Sets Rotating Rectifier - Test
2003/08/01 An Improved Air Lines Group and Carburetor Groups Are Available {1071, 1266}
2012/10/26 Policy for the Reuse of the Turbocharger Turbine Housing {1065}
C15 On-highway Engine Flywheel Housing - Remove and Install
2003/07/01 Improved Auxiliary Pumps are Used {1371}
2003/07/01 Align the Balancer Gears {1204, 1206, 1220}