Expansion Tank - Remove and Install
Removal Procedure
- Disconnect overflow hose (1) .
Show/hide table
 | |
| Illustration 1 | g00996493 |
- Remove bolts (3) .
- Remove overflow tank (2) .
Installation Procedure
- Position overflow tank (2) onto the enclosure.
Show/hide table
| | |
| Illustration 2 | g00996493 |
- Install bolts (3) .
- Connect overflow hose (1) .
Caterpillar Information System:
3500 Engines for Caterpillar Built Generator Sets Engine Oil Filter Base
C1.5 and C2.2 Marine Generator Set Engines Water Temperature Regulator Housing - Remove and Install
3054C Industrial Engine Fuel Injection Pump - Install - Bosch EVPE
3054C Industrial Engine Fuel Injection Pump - Remove - Bosch EVPE
C1.5 and C2.2 Generator Rotor - Remove and Install
C1.5 and C2.2 Marine Generator Set Engines Water Pump - Install
G3520B Industrial Engine Throttle Actuator
C1.5 and C2.2 Marine Generator Set Engines Engine Oil Relief Valve - Remove and Install
C1.5 and C2.2 Marine Generator Set Engines Water Pump - Remove
G3304 and G3306 Engines Magneto - Disassemble
G3500 Engines Prelube Pump - Electric
C1.5 and C2.2 Marine Generator Set Engines Exhaust Manifold - Remove and Install
G3520C and G3520E Generator Set Engines Cylinder Head - Disassemble
G3520C and G3520E Generator Set Engines Cylinder Head - Assemble
C1.5 and C2.2 Marine Generator Set Engines Water Temperature Regulator - Remove and Install
G3500 Engines Prelube Pump - Air
C1.5 and C2.2 Generator Exciter Field - Flash
C27 and C32 Generator Set Engines CID 0100 FMI 10 Engine Oil Pressure Sensor abnormal rate of change
C27 and C32 Industrial and Petroleum Engines CID 0102 FMI 10 Boost Pressure Sensor abnormal rate of change
Product Link 151/201 Installation Examples
3500 Engines for Caterpillar Built Generator Sets Fuel Filter Base
Product Link 151/201 Spare Input Installation
Product Link 151/201 System Installation
Product Link 151/201 Setup