3044C Industrial Engine and Engines for Caterpillar Built Machines Caterpillar


Cylinder Head

Usage:

3044C 344



Illustration 1g00984896

Tighten the cylinder head bolts in the sequence that is shown to the following torque. ... 113 to 123 N·m (83 to 91 lb ft)




Illustration 2g00984909

The permissible distortion of the cylinder head is given below.

Maximum at assembly ... 0.05 mm (0.0020 inch)
Repair limit ... 0.20 mm (0.0079 inch)

Caterpillar Information System:

3044C Industrial Engine and Engines for Caterpillar Built Machines Valve Mechanism Cover
C3.3 Industrial Engine Reference Numbers
G3500B Engines Air Starting Motor
G3520C and G3520E Generator Set Engines Rocker Shaft and Push Rod - Install
G3520C and G3520E Generator Set Engines Rocker Shaft and Push Rod - Remove
G3500B Engines Air Starting Motor - Turbine
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Coolant Level Sensor Circuit - Test
C15 On-highway Engine Variable Valve Actuator
C15 On-highway Engine Variable Valve Actuator Oil Pressure Sensor
EMCPII+ for Gas Engines Starting Motor Magnetic Switch - Test - for Engine with EIS
EMCPII+ for Gas Engines Starting Motor Magnetic Switch - Test - for Engine with ECM
3044C Industrial Engine and Engines for Caterpillar Built Machines Rocker Shaft
3044C Industrial Engine and Engines for Caterpillar Built Machines Fuel System
3046 Engine for Caterpillar Built Machines Air Inlet and Exhaust System
3044C Industrial Engine and Engines for Caterpillar Built Machines Lubrication System
3044C Industrial Engine and Engines for Caterpillar Built Machines Cooling System
3044C Industrial Engine and Engines for Caterpillar Built Machines Basic Engine
3044C Industrial Engine and Engines for Caterpillar Built Machines Electrical System
G3612 and G3616 Engines Cooling System Coolant Sample (Level 1) - Obtain
G3612 and G3616 Engines Cooling System Coolant Sample (Level 2) - Obtain
3044C Industrial Engine and Engines for Caterpillar Built Machines Cylinder Head Valves
3408E and 3412E Engines for Caterpillar Built Machines Vibration Damper - Check
3054C Industrial Engine Housing (Front) - Install
3406E, C-10 and C-12 On-highway Engines Factory Passwords
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.