Rocker Arm and Shaft - Remove
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 124-2946 | Lifting Bracket | 1 |
Start By:
- Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (1).
- Remove rocker arms and shaft (2) as a unit with Tooling (A).
Show/hide table
| |
| Illustration 1 | g01033395 |
Caterpillar Information System:
C11, C13 and C15 On-highway Engines Engine Speed/Timing Sensor Circuit - Test
3056E Industrial Engine Idler Gear - Remove and Install
G3304B and G3306B Engines Engine Oil Filter Base
3056E Industrial Engine Camshaft Gear - Remove and Install
3126B Marine Engines E096 High Fuel Pressure
C11, C13 and C15 On-highway Engines Cooling Fan Is Always ON
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies User Interface for System Cabinet
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies User Interface for Multiple Module Unit
797 Off-Highway Truck Steering System Machine Preparation for Troubleshooting
3056E Industrial Engine Turbocharger - Install
3056E Industrial Engine Turbocharger - Remove
797F Off-Highway Truck Steering System Visual Inspection
3056E Industrial Engine Crankshaft Gear - Remove and Install
C7 and C9 On-Highway Engines 0111-14 Low Coolant Level Warning
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines 0231-02 J1939 Data Incorrect (58)
C9 Marine Auxiliary and Generator Set Engines Engine Oil Sample - Obtain
3126B and 3126E On-highway Engines 0030-08 PTO Throttle signal invalid (29)
3126B and 3126E On-highway Engines 0030-13 PTO Throttle out of calibration (29)
UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing Retainer - Remove and Install
C9 Marine Auxiliary and Generator Set Engines Zinc Rods - Inspect/Replace
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing Retainer - Remove and Install
C9 Marine Auxiliary and Generator Set Engines Fuel System Secondary Filter - Replace
C9 Marine Auxiliary and Generator Set Engines Heat Exchanger - Inspect
C7 and C9 On-Highway Engines Transmission (AT/MT/HT) Relay Circuit - Test