Radiator Side Channel Straps May Crack At The Parts Stock Soldered Joints On Certain D3C, D4C, D5C Track Type Tractors, 933 And 939 Track Type Loaders Caterpillar


Radiator Side Channel Straps May Crack At The Parts Stock Soldered Joints On Certain D3C, D4C, D5C Track Type Tractors, 933 And 939 Track Type Loaders

Usage:

@media screen { div.divFooter { display: none; } } @media print { div.divFooter { position: fixed; bottom: 0; right: 0; } }
Caterpillar: Confidential Yellow

NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.

NOTE: This Program must be administered as soon as possible. When reporting the repair, use "PI3784" as the Part Number, "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description Code. Exception: If the repair is done after failure, use "PI3784" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.

NOTE: This Revised Service Letter replaces the July 25, 1995 Service Letter. Changes have been made to the Action Required.

Completion Date

January 31, 1996

Termination Date

July 31, 1996

Problem

The radiator side channel straps may crack at the soldered joints because of poor solder quality on certain D3C, D4C, D5C Track Type Tractors and 933 and 939 Track Type Loaders.

Affected Product
Model & Identification Number

D3C (6SL1-900 7XL1-373 )

D4C (6YL1-703 7SL1-228 )

D5C (9DL1-858 6ZL1-304 )

933 (8FL1-190 9EL1-67 )

939 (9GL1-337 )

Parts Needed

2 - Fabricated Steel Plate (see Illustration 1)


Illustration 1

Action Required

Affected Product

1. Remove the radiator guard.

2. Weld two fabricated plates to each side of the top of the radiator as shown in Illustration 1.

3. Install the radiator guard and inspect for water leaks.

Parts Stock

Rework all 6I3502, 6I3715, 1004366, and 1083209 radiators in Parts Stock that have poor solder quality using Step 2 above.

Owner Notification

U.S. and Canadian owners will receive the attached Owner Notification.

Service Claim Allowances

NOTE: This is a 5 hour job.

Parts Stock

Submit one claim for all 6I3502, 6I3715, 1004366, and 1083209 radiators reworked from Parts Stock.

NOTE: This is a 1 hour job per radiator.

NOTE: U.S. and Canadian Dealers Only - Eligible dealers may enter a Type 2 SIMS Report.

Parts Disposition

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

NOTE: MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.

Attach.

(1-Owner Notification)

Copy Of Owner Notification For U.s. And Canadian Owners

Caterpillar Information System:

Product Support Program For Reworking The Bead Seat Band Driver Pocket On Certain 994 Wheel Loaders Product Support Program For Reworking The Bead Seat Band Driver Pocket On Certain 994 Wheel Loaders
Product Support Program For Replacing The Rocker Arm Assemblies On Certain 3116 And 3126 Truck Engines, 3126 Marine Engines And Challenger 55 Tractors Product Support Program For Replacing The Rocker Arm Assemblies On Certain 3116 And 3126 Truck Engines, 3126 Marine Engines And Challenger 55 Tractors
Product Support Program For Adding A Stronger Rear Gusset To The Rear Track Roller Frame On Certain D6H LGP Tractors Product Support Program For Adding A Stronger Rear Gusset To The Rear Track Roller Frame On Certain D6H LGP Tractors
Product Support Program For Updating The Torque Converter And Transmission On Certain 928F And 938 Loaders And IT28F Tool Carriers Product Support Program For Updating The Torque Converter And Transmission On Certain 928F And 938 Loaders And IT28F Tool Carriers
Certain 6T8660 Idler Shafts And 9W7234 Seal Groups Used In D11N Tractors Need To Removed From Parts Stock Certain 6T8660 Idler Shafts And 9W7234 Seal Groups Used In D11N Tractors Need To Removed From Parts Stock
The Hitch Wire Harnesses Need To Be Rerouted, Inspected, And Better Secured On Certain 621F, 623F, And 627F Wheel Tractors The Hitch Wire Harnesses Need To Be Rerouted, Inspected, And Better Secured On Certain 621F, 623F, And 627F Wheel Tractors
Blockage In The Brake Valve May Cause Hard Parts Stock Brake Pedal Effort On Certain IT18F, IT24F, IT28F, 918F, 924F, 928F, 938F, 950F, 960F, 966F And 970F Wheel Loaders Blockage In The Brake Valve May Cause Hard Parts Stock Brake Pedal Effort On Certain IT18F, IT24F, IT28F, 918F, 924F, 928F, 938F, 950F, 960F, 966F And 970F Wheel Loaders
Replace The Steering Clutch Control Valves On Certain D5C Series III, D5C Series III LGP Tractors And 939 Track Type Loaders Replace The Steering Clutch Control Valves On Certain D5C Series III, D5C Series III LGP Tractors And 939 Track Type Loaders
Product Support Program For Adding A Stronger Rear Gusset To The Rear Track Roller Frame On Certain D6H Standard Tractors Product Support Program For Adding A Stronger Rear Gusset To The Rear Track Roller Frame On Certain D6H Standard Tractors
Product Support Program For Reworking The 9T9001 And 9T9003 Implement Control Valves On Certain 994 Wheel Loaders Product Support Program For Reworking The 9T9001 And 9T9003 Implement Control Valves On Certain 994 Wheel Loaders
An Adapter Orifice Needs To Be Installed In The Hydraulic Pressure Line To The Payload Sensor On Certain 950, 960F, 966, 970, 980, 988, 990 And 992 Loaders An Adapter Orifice Needs To Be Installed In The Hydraulic Pressure Line To The Payload Sensor On Certain 950, 960F, 966, 970, 980, 988, 990 And 992 Loaders
Product Support Program For Installing A New Water Temperature Regulator On Certain 330, 330L, 330LN, 350, And 350L Excavators; And 966F Series II And 970 Loaders Product Support Program For Installing A New Water Temperature Regulator On Certain 330, 330L, 330LN, 350, And 350L Excavators; And 966F Series II And 970 Loaders
A New Torque Converter Cover Needs To Be Installed On Certain 928F And 938F Loaders And IT28F Tool Carriers A New Torque Converter Cover Needs To Be Installed On Certain 928F And 938F Loaders And IT28F Tool Carriers
Product Support Program For Replacing The Cardan Joint In The Hydrostatic Transmission Of Certain 953B, 963B And 973B Loaders Product Support Program For Replacing The Cardan Joint In The Hydrostatic Transmission Of Certain 953B, 963B And 973B Loaders
A Support Plate Needs To Be Installed On The Torque Converter Impeller Of Certain 518C Grapple Skidders A Support Plate Needs To Be Installed On The Torque Converter Impeller Of Certain 518C Grapple Skidders
A Hydraulic Oil Cooler Core Is Needed To Prevent Hydraulic Oil Overheating On Certain 938F Wheel Loaders And IT38F Integrated Tool Carriers A Hydraulic Oil Cooler Core Is Needed To Prevent Hydraulic Oil Overheating On Certain 938F Wheel Loaders And IT38F Integrated Tool Carriers
The Bail Pins Need To Be Replaced On Certain 627E And 627F Push Pull Scrapers The Bail Pins Need To Be Replaced On Certain 627E And 627F Push Pull Scrapers
Product Support Program For The Clutch Control Rod End On Certain D5E Tractors Product Support Program For The Clutch Control Rod End On Certain D5E Tractors
Product Support Program For Updating Or Repairing Certain 950F, 960F, 966F, 970F And 980F Loaders Equipped With A Payload Measurement System Product Support Program For Updating Or Repairing Certain 950F, 960F, 966F, 970F And 980F Loaders Equipped With A Payload Measurement System
Product Support Program For Replacing The Position Sensor On Certain 950B, 950E, 950F, 960F, 966D, 966E, 966F, 970F, 980C, 980F, 988B, 988F, 990, 992C And 992D Loaders Equipped With A Payload Measurement System Product Support Program For Replacing The Position Sensor On Certain 950B, 950E, 950F, 960F, 966D, 966E, 966F, 970F, 980C, 980F, 988B, 988F, 990, 992C And 992D Loaders Equipped With A Payload Measurement System
Product Support Program For Installing A New Pressure Sensor On Certain 950B, 950E, 950F, 960F, 966D, 966E, 966F, 970F, 980C, 980F, 988B, 988F, 990, 992C And 992D Loaders Equipped With A Payload Measurement System Product Support Program For Installing A New Pressure Sensor On Certain 950B, 950E, 950F, 960F, 966D, 966E, 966F, 970F, 980C, 980F, 988B, 988F, 990, 992C And 992D Loaders Equipped With A Payload Measurement System
Product Support Program For Replacing The Accumulator Clamps On Certain 621E, 623E, 627E, 631E/633E, 637E, And 657E Wheel Tractor Scrapers Product Support Program For Replacing The Accumulator Clamps On Certain 621E, 623E, 627E, 631E/633E, 637E, And 657E Wheel Tractor Scrapers
Product Support Program For Replacing The Rear Axle Front Trunnion On Certain 994 Wheel Loaders Product Support Program For Replacing The Rear Axle Front Trunnion On Certain 994 Wheel Loaders
The Hose From The Turbocharger To The Inlet Manifold May Need To Be Replaced On Certain 918F, 924F, 928F, 938F, 950F And 953B Loaders, IT18F, IT24F And IT28F Tool Carriers, 206B, 212B, 213B, 214B, 320, 320S And 322 Excavators, 613C Scrapers, CS531, C The Hose From The Turbocharger To The Inlet Manifold May Need To Be Replaced On Certain 918F, 924F, 928F, 938F, 950F And 953B Loaders, IT18F, IT24F And IT28F Tool Carriers, 206B, 212B, 213B, 214B, 320, 320S And 322 Excavators, 613C Scrapers, CS531, C
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.