0032-05 Turbo Wastegate Solenoid current low
产生此代码的情况:
发动机控制模块 (ECM) 检测到以下情况:
- ECM 检测到废气旁通电磁阀电路中电流偏低的状况(开路)超过 0.12 秒。
- 蓄电池电压高于 9 伏。
- 理想的电流值必须高于 0.2 安培。
系统响应:
ECM 将记录诊断代码并触发快照。 该故障诊断代码保持激活状态一分钟后,检查发动机指示灯就将亮起。 启用额定功率降低后,卡特彼勒电子技师 (ET) 将指示"涡轮增压器保护额定功率降低启用"。
该故障诊断代码为激活状态的同时,发动机将会额定功率降低运转。
该故障诊断代码说明废气旁通电磁阀电路有故障。
测试步骤 1. 进行以下的诊断步骤: 废气旁通电磁阀 - 测试
结果:
- 正常 - 停止
Caterpillar Information System:
2002/09/16 Plug In Place of a Bolt or a Stud for the Front Engine Mount {1152}
C-15 Truck Engine Vibration Damper
C-10 and C-12 Truck Engines Cylinder Liner
3054E Industrial Engine Engine Oil Bypass Valve
3054E Industrial Engine Electric Starting Motor
3054E Industrial Engine Alternator and Regulator
3500 Marine Engines Engine Design
C13, C15, and C18 Generator Set Engines Vibration Damper and Pulley
3126B Marine Engines Event Codes
C9 Urban Transit Bus Engine Starting the Engine
C-15, C-16, and C-18 Truck Engines Piston and Rings
C-15, C-16, and C-18 Truck Engines Cylinder Liner
3054E and 3056E Industrial Engines Self-Diagnostics
C7 and C9 On-Highway Engines 0032-06 Turbo Wastegate Solenoid current high
C7 and C9 On-Highway Engines 0032-11 Turbo Wastegate Solenoid current mismatch
C-15, C-16, and C-18 Truck Engines Crankshaft
3054E and 3056E Industrial Engines Diagnostic Lamp
3054E and 3056E Industrial Engines Engine Operation with Active Diagnostic Codes
3054E and 3056E Industrial Engines Engine Operation with Intermittent Diagnostic Codes
2002/10/01 The Junction Block That Is Used In The Coolant Lines For The Turbocharger Has Been Improved {1380}
C9 Urban Transit Bus Engine Vehicle Speed Parameters
C-15, C-16, and C-18 Truck Engines Camshaft
3054E and 3056E Industrial Engines Cold Weather Starting
3500 Marine Engines Engine Design