 | |
| Illustration 1 | g00293349 |
Cylinder And Valve Location (A) Inlet valves (B) Exhaust valves | |
Number and arrangement of cylinders ... 60 degree V-12
Valves per cylinder ... 4
Displacement ... 51.8 L (3158 cu in)
Bore ... 170 mm (6.7 inch)
Stroke ... 190 mm (7.5 inch)
Compression ratio
One piece piston ... 13:1
Two-piece piston ... 13.5:1
Combustion ... Direct injection
On engines with standard rotation, when the crankshaft is viewed from the flywheel end, the crankshaft rotates in the following direction. ... Counterclockwise
Firing order (injection sequence)
Standard rotation CCW ... 1, 12, 9, 4, 5, 8, 11, 2, 3, 10, 7, 6
Reverse rotation CW ... 1, 4, 9, 8, 5, 2, 11, 10, 3, 6, 7, 12
Valve lash
Inlet ... 0.50 mm (.020 inch)
Exhaust ... 1.00 mm (.040 inch)
Note: The front end of the engine is opposite the flywheel end of the engine. The left and the right side of the engine are determined from the flywheel end. The number 1 cylinder is the front cylinder on the right side. The number 2 cylinder is the front cylinder on the left side.