Vibration Damper and Pulley
Show/hide table
| 图 1 | g01887204 |
(1) 组装之前，先用二硫化钼或石墨基润滑剂对螺栓的螺纹进行润滑。
(2) 拔梢锁紧双头螺柱的扭矩 ... 65 ± 10 N·m (48 ± 7 lb ft)
(3) 全螺纹螺母的扭矩 ... 135 ± 20 N·m (100 ± 15 lb ft)
Caterpillar Information System:
3126B Marine Engines Event Codes
C9 Urban Transit Bus Engine Starting the Engine
C-15, C-16, and C-18 Truck Engines Piston and Rings
C-15, C-16, and C-18 Truck Engines Cylinder Liner
2002/09/01 Check the Calibration of the Wastegate Actuator in order to Diagnose a Low Boost Condition {1057}
3176C and 3196 Engines for Caterpillar Built Machines Turbocharger
G3520B Engines MID 036 - CID 1636 - FMI 09 Loss of Communication with Engine #2 (Slave)
C-15, C-16, and C-18 Truck Engines Cylinder Head Valves
G3520B Engines MID 033 - CID 0590 - FMI 09 Unable to communicate with Engine ECM
C9 Marine Auxiliary and Generator Set Engines Diagnostic Flash Code Retrieval
3500 Spark Ignited Engines Camshaft
3500 Spark Ignited Engines Camshaft
3500 Marine Engines Engine Design
3054E Industrial Engine Alternator and Regulator
3054E Industrial Engine Electric Starting Motor
3054E Industrial Engine Engine Oil Bypass Valve
C-10 and C-12 Truck Engines Cylinder Liner
C-15 Truck Engine Vibration Damper
2002/09/16 Plug In Place of a Bolt or a Stud for the Front Engine Mount {1152}
C7 and C9 On-Highway Engines 0032-05 Turbo Wastegate Solenoid current low
3054E and 3056E Industrial Engines Self-Diagnostics
C7 and C9 On-Highway Engines 0032-06 Turbo Wastegate Solenoid current high
C7 and C9 On-Highway Engines 0032-11 Turbo Wastegate Solenoid current mismatch
C-15, C-16, and C-18 Truck Engines Crankshaft