Change to Specifications Manual {1157}
- Industrial Engines:
- C-10 (S/N: BCX)
- Marine Engines:
- 3176C (S/N: 6BW)
- C-12 (S/N: BDL; CPN; JAC)
- 3176C (S/N: 5DZ; CRJ)
- 3196 (S/N: 2XR)
Reference: A torque sequence for the bolts that mount the flywheel housing to the cylinder block has been added to the specifications for the flywheel housings on these engines. This change is shown in the text that follows. This change will be included in the next revision of these manuals.
Show/hide table
Illustration 1 | g00877675 |
(1) Apply 1U-6396 O-Ring Assembly Compound to the O-Ring. Install the O-Ring.
Show/hide table
Illustration 2 | g00877679 |
Show/hide table
Illustration 3 | g00871606 |
Torque sequence |
(2) Flywheel housing
(3) Apply 1U-8846 Sealant on the gasket surface of the flywheel housing. Assemble the flywheel housing to the cylinder block and tighten within ten minutes of applying the sealant. Use the torque sequence that is shown in Illustration 3 to tighten the bolts.
(4) Cylinder block
Caterpillar Information System:
G3408C and G3412C Engines Carburetor Control Linkage
3056E Industrial Engine Crankshaft Seals
3056E Industrial Engine Water Temperature Regulator
3056E Industrial Engine Engine Oil Pan
3054E Industrial Engine Engine Oil Pressure
3056E Industrial Engine Engine Oil Pump
G3408C and G3412C Engines Carburetor Control Linkage
3056E Industrial Engine Cylinder Head Valves
793F and 797F Off-Highway Trucks Power Train Electronic Control System MID 081 - CID 0672 - FMI 08
3056E Industrial Engine Fuel Injection Nozzles
3500 Engines Duplex Oil Filter - Adjust
793F and 797F Off-Highway Trucks Power Train Electronic Control System MID 081 - CID 0672 - FMI 02
3500 Generator Set Engines Cooling System Pressure Cap
3500 Generator Set Engines Cooling System Pressure Cap
3500 Generator Set Engines Cooling System Pressure Cap
3500 Generator Set Engines Cooling System Pressure Cap
G3408C and G3412C Engines Carburetor Control Linkage
Inadvertent Rollover of Lifetime Totals{1901} Inadvertent Rollover of Lifetime Totals{1901}
C-9 Industrial Engine Glossary of Electronic Control Terms
2002/04/01 Jacket Water Tank Type Heaters Are Now Available {1383}
C-9 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
3412 Generator Set Engines Gear Group (Front)
G3304 and G3306 Engines Coolant Temperature Switch
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders Engine Will Not Crank