Fuel Shutoff Solenoid - Test
Disengage the clutch and operate the engine at low idle rpm for this test.
The solenoids for fuel shutoffs are located in the monitor panel on the left rear side of the engine.
- Press button (1) and hold the button down.
If the shutdown is operating correctly, the engine will coast to a stop.
Note: Because of the unexpected shutdowns, the control system will probably generate alarms during this test. This is normal. The response of the control system will depend on the equipment in the specific installation. After the test, clear the alarms and reset the control system.
Show/hide table
Illustration 1 | g00866604 |
Front view and inside of the monitor panel (1) Push button for the fuel control linkage (2) Solenoid for the fuel control linkage (3) Push button for the shutdown cylinder (4) Solenoid for the shutdown cylinder |
- Acknowledge any alarms and reset the control system.
- Restart the engine.
- Press button (3) and hold the button down.
If the shutdown is operating correctly, the engine will coast to a stop.
- Acknowledge any alarms and reset the control system.
Caterpillar Information System:
2002/04/01 A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/01 The 3600 Lube Oil Experience List Is Available {1348, 7581}
2002/03/01 A New Special Publication, LEBV1912, "Caterpillar 3600 Diesel Engine Single Cylinder Overhaul Procedure" Is Available {1000, 1223}
2002/03/25 Change to Specifications Manual {1157}
3500 Industrial Engines Power Take-Off Clutch
3500 Industrial Engines Power Take-Off Clutch
3500 Industrial Engines Power Take-Off Clutch
3500 Industrial Engines Power Take-Off Clutch
2002/03/01 New Engine Oil Heater Groups Are Available And New Coolant and Engine Oil Heater Groups Are Available {1333, 1383}
3512B Engine for SPF343, SPS343, and SPT343 Pumpers Engine Will Not Crank
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Engine Misfires, Runs Rough or Is Unstable
3500 Industrial Engines Signal Generator
3618 Engine Emergency Stop Push Button - Test
2002/03/25 Change to Disassembly and Assembly Manual {1157}
2002/03/18 Clarification of Service Interval for Setting Engine Valve Lash {1102}
2002/03/01 Clarification of Service Interval for Setting Engine Valve Lash {1102}
3500 Industrial Engine Attachments Fuel System
2002/03/01 Recommendations For Maintenance And Operation For Caterpillar Ignition Systems (CIS) {1550}
3618 Engine Engine Speed Switch - Calibrate
CIPI UNDERCARRIAGE Arrangements: 9Q-5240, 9Q-5241, 9Q-5242, 9Q-5250, 9Q-5253, 9Q-5265, 9Q-5266, 9Q-5392, 9Q-5393, 9Q-5478, 9Q-5504, 9Q-5621, 9Q-5643, 9Q-5651, 9Q-5709, 9Q-5718, 9Q-5723, 9Q-5724, 9Q-5725, 9Q-5726, 9Q-5731, 9Q-5747, 9Q-5780, 9Q-5792, 9 Travel Counterbalance Valve
CIPI UNDERCARRIAGE Arrangements: 166-7047, 177-3011, 177-3553, 177-4279, 200-2995, 200-4060, 204-0808, 212-6225, 213-8653, 215-7227, 218-2237, 231-5143, 3Q-6638, 3Q-6641, 6Z-7749, 6Z-7751, 6Z-7857, 6Z-7890, 6Z-7926, 6Z-7938, 6Z-7992, 9Q-5034, 9Q-5042 Travel Counterbalance Valve
2002/03/01 Change to Disassembly and Assembly Manual {1225}
3618 Engine Contactor - Adjust
Alternator - Delco 27SI Field Winding - Test