Change to Specifications Manual {1157}
- Machine Engines:
- 3176C (S/N: 3PD)
- 3196 (S/N: 5ED)
- C-12 (S/N: JAC; CPN)
Reference: A torque sequence for the bolts that mount the flywheel housing to the cylinder block has been added to the specifications for the flywheel housings on these machine engines. This change is shown in the text that follows. This change will be included in the next revision of these manuals.
Show/hide table
Illustration 1 | g00877469 |
(1) Apply 1U-6396 O-Ring Assembly Compound to the O-ring. Install the O-Ring.
Show/hide table
Illustration 2 | g00877646 |
Show/hide table
Illustration 3 | g00871606 |
Torque sequence |
(2) Flywheel housing
(3) Apply 1U-8846 Sealant on the gasket surface of the flywheel housing. Assemble the flywheel housing to the cylinder block and tighten within ten minutes of applying the sealant. Use the torque sequence that is shown in Illustration 3 to tighten the bolts.
(4) Cylinder block
Caterpillar Information System:
3500 Industrial Engines Power Take-Off Clutch
3500 Industrial Engines Power Take-Off Clutch
3500 Industrial Engines Power Take-Off Clutch
3500 Industrial Engines Power Take-Off Clutch
2002/03/01 New Engine Oil Heater Groups Are Available And New Coolant and Engine Oil Heater Groups Are Available {1333, 1383}
3512B Engine for SPF343, SPS343, and SPT343 Pumpers Engine Will Not Crank
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Engine Misfires, Runs Rough or Is Unstable
3500 Industrial Engines Signal Generator
2002/03/01 WEB Sites Are Available On The Internet For Products That Are Manufactured At The Large Engine Center {1000}
3126B Marine Engines Poor Acceleration or Response
3500 Generator Set Engines Tachometer Drive
3406E, C12, C15 and C18 Marine Engines Low Power/Poor or No Response to Throttle
2002/03/01 A New Special Publication, LEBV1912, "Caterpillar 3600 Diesel Engine Single Cylinder Overhaul Procedure" Is Available {1000, 1223}
2002/03/01 The 3600 Lube Oil Experience List Is Available {1348, 7581}
2002/04/01 A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
3618 Engine Fuel Shutoff Solenoid - Test
3618 Engine Emergency Stop Push Button - Test
2002/03/25 Change to Disassembly and Assembly Manual {1157}
2002/03/18 Clarification of Service Interval for Setting Engine Valve Lash {1102}
2002/03/01 Clarification of Service Interval for Setting Engine Valve Lash {1102}
3500 Industrial Engine Attachments Fuel System
2002/03/01 Recommendations For Maintenance And Operation For Caterpillar Ignition Systems (CIS) {1550}
3618 Engine Engine Speed Switch - Calibrate
CIPI UNDERCARRIAGE Arrangements: 9Q-5240, 9Q-5241, 9Q-5242, 9Q-5250, 9Q-5253, 9Q-5265, 9Q-5266, 9Q-5392, 9Q-5393, 9Q-5478, 9Q-5504, 9Q-5621, 9Q-5643, 9Q-5651, 9Q-5709, 9Q-5718, 9Q-5723, 9Q-5724, 9Q-5725, 9Q-5726, 9Q-5731, 9Q-5747, 9Q-5780, 9Q-5792, 9 Travel Counterbalance Valve