New Alternator Bracket Assembly is Now Available on Certain 374F and 390F Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {1401, 1402, 1408}
- Excavator
- 374F (S/N: AT21-UP; EBF1-UP; NFJ1-UP; MFL1-UP; DNM1-UP)
- 390F (S/N: HJD1-UP; TYE1-UP; MGF1-UP; FEH1-UP; GAY1-UP)
- Mobile Hydraulic Power Unit
- 374F MHPU (S/N: DP41-UP; H251-UP)
- 390F MHPU (S/N: B371-UP; H271-UP)
- OEM Excavator Based Specialty Solution
- 374F OEM (S/N: FH91-UP; P4L1-UP)
- 390F OEM (S/N: N641-UP; PT71-UP; P4J1-UP)
New alternator bracket assembly is now available on the machines listed above. The new alternator bracket assembly provides better resistance to vibration.
Show/hide table
| New and Former Part Numbers | ||||
|---|---|---|---|---|
| Item | Qty | New Part Number | Part Name | Former Part Number |
| 1 | 1 | Alternator Bracket As | ||
Show/hide table
| |
| Illustration 1 | g06153465 |
|
(1) | |
Caterpillar Information System:
G3516 TA Engine Electronic Service Tools
M314F, M316F, M318F, M320F and M322F Wheeled Excavators Sensor (Data Link Type) - Test
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735C, 740 Ejector, 740C Ejector, 745 and 745C Articulated Trucks Cat® Production Measurement Application Configuration
Rework Procedure for the Control Lever Assembly Is Now Used on Certain 390F Excavators and OEM Excavator Based Specialty Solutions {5070} Rework Procedure for the Control Lever Assembly Is Now Used on Certain 390F Excavators and OEM Excavator Based Specialty Solutions {5070}
Procedure to Install Pin Group for Hydraulic Shear Attachment On Certain Hydraulic Excavators {6344, 6501, 6502} Procedure to Install Pin Group for Hydraulic Shear Attachment On Certain Hydraulic Excavators {6344, 6501, 6502}
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735C, 740 Ejector, 740C Ejector, 745 and 745C Articulated Trucks Cat® Production Measurement Application Software - Install
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735C, 740 Ejector, 740C Ejector, 745 and 745C Articulated Trucks Cat® Production Measurement Application Loaded Machine - Calibrate
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735C, 740 Ejector, 740C Ejector, 745 and 745C Articulated Trucks Cat® Production Measurement Application Empty Machine - Calibrate
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735C, 740 Ejector, 740C Ejector, 745 and 745C Articulated Trucks Cat® Production Measurement Application Calibration Using Electronic Service Tool
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735C, 740 Ejector, 740C Ejector, 745 and 745C Articulated Trucks Cat® Production Measurement Application Connector Contact Description
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735C, 740 Ejector, 740C Ejector, 745 and 745C Articulated Trucks Cat® Production Measurement Application ECM - Replace
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Hydraulic Rotator
300.9D and 300.9D VPS Mini Hydraulic Excavator Battery or Battery Cable - Inspect/Replace
Turbocharger Wastegate Actuator Rod on Certain C7.1 Machine Engines {1052} Turbocharger Wastegate Actuator Rod on Certain C7.1 Machine Engines {1052}
Camera View on Display May be Unclear on Certain Cat® Products {7348} Camera View on Display May be Unclear on Certain Cat® Products {7348}
14L Motor Grader Blade Lift Cylinder Socket - Check/Adjust/Replace
C7.1 Engines and Generator Sets CAN Data Link - Test
C7.1 Engines and Generator Sets Coolant Level - Test
C7.1 Engines and Generator Sets Cooling Fan Control - Test - Hydraulic Driven Fan
C7.1 Engines and Generator Sets Cooling Fan Control - Test - Viscous Clutch Fan
C7.1 Engines and Generator Sets Cooling Fan Reversing - Test - Hydraulic Driven Fan
C7.1 Engines and Generator Sets Cooling Fan Speed - Test
C7.1 Engines and Generator Sets Data Link - Test
C7.1 Engines and Generator Sets Data Link Configuration Status - Test