Blade Lift Cylinder Socket - Check/Adjust/Replace
Show/hide table
| |
| Illusztráció 1 | g03833677 |
|
Jellemző példa látható | |
Megjegyzés Az alátétek célja nem az, hogy állíthatóságot biztosítanak a golyós végű csavar felülete számára, hanem az aljzat/fedél és a betét pereme közötti tűrésért felelősek. Az alátétek lehetővé teszik a nyomás megfelelő átvitelét a hidraulikus hengeren keresztül a betétre, majd a golyós rendszerre. Az alátétek nem megfelelő alkalmazása a betét eldeformálódását, a felületek egymáshoz szorulását, valamint a betét/golyós végű csavar sérülését/tönkremenetelét eredményezheti.
Show/hide table
| |
| Illusztráció 2 | g06152065 |
Caterpillar Information System:
Camera View on Display May be Unclear on Certain Cat® Products {7348} Camera View on Display May be Unclear on Certain Cat® Products {7348}
Turbocharger Wastegate Actuator Rod on Certain C7.1 Machine Engines {1052} Turbocharger Wastegate Actuator Rod on Certain C7.1 Machine Engines {1052}
300.9D and 300.9D VPS Mini Hydraulic Excavator Battery or Battery Cable - Inspect/Replace
New Alternator Bracket Assembly is Now Available on Certain 374F and 390F Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {1401, 1402, 1408} New Alternator Bracket Assembly is Now Available on Certain 374F and 390F Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {1401, 1402, 1408}
G3516 TA Engine Electronic Service Tools
M314F, M316F, M318F, M320F and M322F Wheeled Excavators Sensor (Data Link Type) - Test
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735C, 740 Ejector, 740C Ejector, 745 and 745C Articulated Trucks Cat® Production Measurement Application Configuration
Rework Procedure for the Control Lever Assembly Is Now Used on Certain 390F Excavators and OEM Excavator Based Specialty Solutions {5070} Rework Procedure for the Control Lever Assembly Is Now Used on Certain 390F Excavators and OEM Excavator Based Specialty Solutions {5070}
Procedure to Install Pin Group for Hydraulic Shear Attachment On Certain Hydraulic Excavators {6344, 6501, 6502} Procedure to Install Pin Group for Hydraulic Shear Attachment On Certain Hydraulic Excavators {6344, 6501, 6502}
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735C, 740 Ejector, 740C Ejector, 745 and 745C Articulated Trucks Cat® Production Measurement Application Software - Install
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735C, 740 Ejector, 740C Ejector, 745 and 745C Articulated Trucks Cat® Production Measurement Application Loaded Machine - Calibrate
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735C, 740 Ejector, 740C Ejector, 745 and 745C Articulated Trucks Cat® Production Measurement Application Empty Machine - Calibrate
C7.1 Engines and Generator Sets CAN Data Link - Test
C7.1 Engines and Generator Sets Coolant Level - Test
C7.1 Engines and Generator Sets Cooling Fan Control - Test - Hydraulic Driven Fan
C7.1 Engines and Generator Sets Cooling Fan Control - Test - Viscous Clutch Fan
C7.1 Engines and Generator Sets Cooling Fan Reversing - Test - Hydraulic Driven Fan
C7.1 Engines and Generator Sets Cooling Fan Speed - Test
C7.1 Engines and Generator Sets Data Link - Test
C7.1 Engines and Generator Sets Data Link Configuration Status - Test
C7.1 Engines and Generator Sets Electrical Power Supply - Test
C7.1 Engines and Generator Sets Ether Starting Aid - Test
C7.1 Engines and Generator Sets Glow Plug Starting Aid - Test
Rework Procedure for the Chassis Harness Assembly on Certain 303E Mini Hydraulic Excavators {1408} Rework Procedure for the Chassis Harness Assembly on Certain 303E Mini Hydraulic Excavators {1408}