SCT673 Truck Mounted PumperPOD Caterpillar

Show/hide table

Be sure that all personnel are clear of the blender while the blender is being raised or while the blender is being lowered. Keep hands clear of pinch points. Failure to stay clear of the blender may result in personal injury or death.

Illustration 1	g00839113
(1) Interlock valve (2) Cylinder pressure gauge (3) Lift control lever

Raise Blender

1. Before the blender is raised, ensure that there is no material in the blender or on the blender.

2. Press in on interlock valve (1) and keep the interlock valve depressed.

3. Push lift control lever (3) to the up position in order to raise the blender.

4. Continue raising the blender until the rubber stops are compressed.

5. Release the interlock valve in order to lock the blender into the travel position.

Lower Blender

1. Press in on interlock valve (1) and keep the interlock valve depressed.

2. Push lift control lever (3) to the down position in order to lower the blender.

3. Continue lowering the blender until the blender hits the stops.