Handle Control (Travel)
Show/hide table
| |
| Illustration 1 | g02594823 |
Show/hide table
| Specification for Handle Control Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 095-0728 Screw | Apply blue Loctite 242 to the threads of the screws. |
| A | - | - | Amount of free play is 12.4 degrees. |
| 2 | 4 | 8T-4195 Bolt | Torque to |
Caterpillar Information System:
3116 Truck Engine Gear Group - Inspect
3408E and 3412E Industrial Engines Cylinder Block
3054 and 3056 Marine Generator Set Engines Alternator - Test
3116 Truck Engine Exhaust Brake
3126E Truck Engine Turbocharger
SCT673 Truck Mounted PumperPOD Control Panel - Raise/Lower Blender
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Dry Contact - Configure
3054 and 3056 Marine Generator Set Engines Air Inlet Heater - Test
3126 Truck Engine (Military) Engine Oil and Filter - Change
3126 Truck Engine (Military) Maintenance Interval Schedule
3126 Truck Engine (Military) Engine Operation
3054 and 3056 Engines 520 Generator Set Control Panel Initial Startup Procedure
3126 Truck Engine (Military) Reference Material
C27 and C32 Engines for Caterpillar Built Machines System Overview
3408E and 3412E Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
2001/11/01 Methods For Submitting Feedback For Service Information {1000}
3408E and 3412E Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
3116 Truck Engine Air Inlet Heater - Test
3116 Truck Engine Engine Oil Pressure Switch - Test
3116 Truck Engine Fuel Shutoff Solenoid - Test
2002/07/01 C-10/C-12/3176C/3196 Front Housing Bolts {1151}
Automatic Transfer Switches CTS, CTSD Series Reference Material
Automatic Transfer Switches CTG, CTGD Series Reference Material
G3406 Engine Plate Locations and Film Locations