Engine Starting
If a warning tag is attached to the engine start switch or to the controls, DO NOT start the engine or move the controls. Consult with the person that attached the warning tag before the engine is started.
Do not start the engine when anyone is working on the generator set. Do not start the engine when anyone is working near the generator set.
All protective guards and all protective covers must be installed if the engine is started in order to perform service procedures. To help prevent an accident that is caused by parts in rotation, work around the parts carefully.
Start the engine from the touchscreen display and/or the engine control switch (ECS) on the switchgear.
Engine exhaust contains products of combustion which can be harmful to your health. If the power module is started in an enclosed area, vent the engine exhaust to the outside. Always operate the power module in order to ensure that proper ventilation is achieved.
Caterpillar Information System:
Power Module Switchgear (Low Voltage and Medium Voltage) Before Starting Engine
3114, 3116, and 3126 Industrial and Generator Set Engines Fan Drive Bearing - Lubricate - If Equipped
3056E Industrial Engine Camshaft Bearings
Automatic Transfer Switches CTG, CTGD Series Power Failure Operation
PMG3516 Power Module Reference Material
Automatic Transfer Switches CTG, CTGD Series Control Connections of the Transfer Switch
3512B and 3516B High Displacement Locomotive Engines Specifications
G3500B Engines Fumes Disposal Filter Element - Replace
G3500 Generator Sets Fumes Disposal Filter - Drain
G3612 and G3616 Engines Crankcase Pressure - Measure - Engines with Fumes Disposal Filters
G3500B Engines Fumes Disposal Filter Differential Pressure - Check
2001/10/01 Parts Manuals for Skid Mounted Pumpers and Skid Mounted Power Packs Are Now Provided on CD-ROMs {7000}
Power Module Switchgear (Low Voltage and Medium Voltage) Engine Stopping
Power Module Switchgear (Low Voltage and Medium Voltage) Burn Prevention
Operating Instructions for the 4P-4788 Electrical Converter Gp and the 4P-4789 Electrical Converter Gp {1421} Operating Instructions for the 4P-4788 Electrical Converter Gp and the 4P-4789 Electrical Converter Gp {1421}
2001/10/01 New Piston Assemblies Are Used {1214}
G3408C and G3412C Engines Ignition Transformer
SR4 Generator with VR3 or VR4 Voltage Regulator Glossary
Installation and Removal Of The Mechanically Attached Wear Plate System Installation and Removal Of The Mechanically Attached Wear Plate System
SR4 Generator with VR3 or VR4 Voltage Regulator General Information
3406E and C15 Marine Engines Auxiliary Water Pump - Disassemble - Rubber Impeller
C27 and C32 Engines for Caterpillar Built Machines CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Pressure Switch - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Glow Plugs - Remove and Install