C27 and C32 Engines for Caterpillar Built Machines Caterpillar


CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat

Usage:

854K 221
Kondisi-kondisi yang mendorong penciptaan kode ini:

Modul Kontrol Elektronik (ECM, Electronic Control Module) mendeteksi tegangan sinyal yang berada di atas normal.

Tanggapan:

ECM akan mencatat kode diagnostik. ECM memberikan tanda pada tekanan masuk turbocharger sebagai data yang tidak valid dan nilai default digunakan.

Kemungkinan Akibat Perlaksanaan:

  • Tidak ada efek pada kinerja.

Pemecahan Masalah:

Langkah Pengujian" status="1 1. Laksanakan, Prosedur Pemeriksaan berikut: "Sirkuit Terbuka atau Hubung-Singkat pada Sensor Tekanan Engine - Pengujian"

Hasil:

  • OK - BERHENTI

Caterpillar Information System:

3406E and C15 Marine Engines Auxiliary Water Pump - Disassemble - Rubber Impeller
SR4 Generator with VR3 or VR4 Voltage Regulator General Information
Installation and Removal Of The Mechanically Attached Wear Plate System Installation and Removal Of The Mechanically Attached Wear Plate System
SR4 Generator with VR3 or VR4 Voltage Regulator Glossary
G3408C and G3412C Engines Ignition Transformer
2001/10/01 New Piston Assemblies Are Used {1214}
Operating Instructions for the 4P-4788 Electrical Converter Gp and the 4P-4789 Electrical Converter Gp {1421} Operating Instructions for the 4P-4788 Electrical Converter Gp and the 4P-4789 Electrical Converter Gp {1421}
Power Module Switchgear (Low Voltage and Medium Voltage) Burn Prevention
Power Module Switchgear (Low Voltage and Medium Voltage) Engine Stopping
Power Module Switchgear (Low Voltage and Medium Voltage) Engine Starting
Power Module Switchgear (Low Voltage and Medium Voltage) Before Starting Engine
3114, 3116, and 3126 Industrial and Generator Set Engines Fan Drive Bearing - Lubricate - If Equipped
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Pressure Switch - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Glow Plugs - Remove and Install
3126B Marine Engines CID 0105 FMI 03 Inlet Manifold Temp Sensor open/short to +batt
Automatic Transfer Switches CTG, CTGD Series Exerciser
3126B Marine Engines CID 0105 FMI 04 Inlet Manifold Temp Sensor short to ground
SCT673 Truck Mounted PumperPOD Junction Box
SR4 Generator with VR3 or VR4 Voltage Regulator Component Descriptions
3054 and 3056 Marine Generator Sets Stopping the Engine
SR4 Generator with VR3 or VR4 Voltage Regulator Generator Operation
3408E and 3412E Industrial Engines Engine Sensor Open/Short Circuit - Test
3408E and 3412E Industrial Engines E017 High Engine Coolant Temperature Warning
3126B Marine Engines CID 1249 FMI 08 Secondary Throttle Position signal abnormal
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.