G3500 Generator Sets Caterpillar


Fumes Disposal Filter - Drain

Usage:

G3516B CME

------ WARNING! ------

Hot oil and components can cause personal injury.

Do not allow hot oil or components to contact skin.


Note: Always disconnect power to the fumes collector prior to servicing. The motor is protected by a thermal protector. If the motor is shut down due to excessive heat, the motor will automatically restart when the protector resets.

  1. Shut down the engine and the fumes disposal filter.


    Illustration 1g00767587
    (1) Drip leg
    (2) Condensation trap drain valve

  2. Open drip leg (1) and drain the fluid into a suitable container.

    If the filter is installed and maintained properly, no more than 28 g (1 ounce) of fluid will be drained.

    If more than one 28 g (1 ounce) is drained, make sure that the filter is installed according to the instructions in Special Instruction, REHS0883. Ensure that the system is operating properly.

  3. Close the drip leg.

  4. Open condensation trap drain valve (2) and drain the fluid into a suitable container.

  5. Close the condensation trap drain valve.

    Resume normal operation.

Caterpillar Information System:

G3612 and G3616 Engines Crankcase Pressure - Measure - Engines with Fumes Disposal Filters
G3500B Engines Fumes Disposal Filter Differential Pressure - Check
2001/10/01 Parts Manuals for Skid Mounted Pumpers and Skid Mounted Power Packs Are Now Provided on CD-ROMs {7000}
PMG3516 Power Module Engine Crankcase Breather - Clean
Automatic Transfer Switches CTG, CTGD Series General Information
3512B and 3516B High Displacement Locomotive Engines Product Description
PMG3516 Power Module Starting the Engine
2001/11/12 A New Rear Housing Assembly is Available {1157}
3056E Industrial Engine Camshaft
Automatic Transfer Switches CTG, CTGD Series Model View Illustrations
G3406 and G3412 Generator Sets Manual Stop Procedure
SCT673 Truck Mounted PumperPOD Junction Box - Blender
G3500B Engines Fumes Disposal Filter Element - Replace
3512B and 3516B High Displacement Locomotive Engines Specifications
Automatic Transfer Switches CTG, CTGD Series Control Connections of the Transfer Switch
PMG3516 Power Module Reference Material
Automatic Transfer Switches CTG, CTGD Series Power Failure Operation
3056E Industrial Engine Camshaft Bearings
3114, 3116, and 3126 Industrial and Generator Set Engines Fan Drive Bearing - Lubricate - If Equipped
Power Module Switchgear (Low Voltage and Medium Voltage) Before Starting Engine
Power Module Switchgear (Low Voltage and Medium Voltage) Engine Starting
Power Module Switchgear (Low Voltage and Medium Voltage) Engine Stopping
Power Module Switchgear (Low Voltage and Medium Voltage) Burn Prevention
Operating Instructions for the 4P-4788 Electrical Converter Gp and the 4P-4789 Electrical Converter Gp {1421} Operating Instructions for the 4P-4788 Electrical Converter Gp and the 4P-4789 Electrical Converter Gp {1421}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.