Camshaft
Show/hide table
 | |
| 图 1 | g00976240 |
检查凸轮轴的端隙 | |
(1) 新曲轴的轴向间隙 ... 0.10 至 0.41 mm (0.004 至 0.016 in)
磨损凸轮轴的最大允许轴向间隙 ... 0.53 mm (0.021 in)
Show/hide table
 | |
| 图 2 | g00976195 |
凸轮轴和止推垫圈 | |
(2) 螺栓
- 将螺栓拧紧至下述扭矩。 ... 95 N·m (70 lb ft)
(3) 凸轮轴止推垫圈
- 止推垫圈的厚度 ... 5.49 至 5.54 mm (0.216 至 0.218 in)
- 缸体上为止推垫圈预留的凹座的深度 ... 5.46 至 5.54 mm (0.215 至 0.218 in)
- 止推垫圈在缸体前表面的公差 ... −0.05 至 +0.08 mm (−0.002 至 +0.003 in)
(4) 下表列出了凸轮轴轴颈的直径。
Show/hide table
| 凸轮轴轴颈的直径 | ||
| 凸轮轴轴颈 | 标准直径 | 维修极限直径 (1) |
| 1 | 50.710 至 50.740 mm (1.9965 至 1.9975 in) |
50.660 mm (1.9945 in) |
| 2 | 50.460 至 50.480 mm (1.9865 至 1.9875 in) |
50.410 mm (1.9845 in) |
| 3 | 50.200 至 50.230 mm (1.9764 至 1.9775 in) |
50.150 mm (1.9745 in) |
| 4 | 49.950 至 49.980 mm (1.9665 至 1.9675 in) |
49.900 mm (1.9645 in) |
Show/hide table
| ( 1 ) | 维修极限是针对零件规定的最大或最小尺寸。 达到维修极限的零件必须更换。 |
轴颈的内部间隙 ... 0.06 至 0.14 mm (0.002 至 0.006 in)
Show/hide table
 | |
| 图 3 | g00629702 |
凸轮轴的截面图 | |
(5) 凸轮凸角升程
规定的凸轮凸角升程 (5)
- 进气凸轮 ... 7.62 至 7.69 mm (0.300 至 0.303 in)
- 排气凸轮 ... 7.71 至 7.79 mm (0.304 至 0.307 in)
(6) 凸轮凸角高度
(7) 基圆
利用以下程序确定凸轮升程：
- 测量凸轮凸角高度 (6) 。
- 测量基圆 (7) 。
- 将步骤 2 中得到的基圆数值从步骤 1 中得到的凸轮凸角高度中减去。 二者之差就是实际凸轮凸角升程。
新凸轮轴的实际凸轮升程和规定凸轮升程的最大允许差值 ... 0.05 mm (0.002 in)
Caterpillar Information System:
Automatic Transfer Switches CTG, CTGD Series Model View Illustrations
G3406 and G3412 Generator Sets Manual Stop Procedure
SCT673 Truck Mounted PumperPOD Junction Box - Blender
Automatic Transfer Switches CTG, CTGD Series Engine Control Connections of the Controller
G3500B Engines Compression
Automatic Transfer Switches CTG, CTGD Series Functional Test of the Transfer Switch
G3406 Engine Vibration Damper - Check
C-15 Truck Engine Speed and Timing Sensor
2001/10/01 New Schematics Are Available for Generator Sets {7566}
2001/11/01 New VR6 Voltage Regulator Available {1410}
3126B and 3126E On-highway Engines 0100-11 Very Low Oil Pressure (46)
3126B and 3126E On-highway Engines 0111-01 Low Coolant Level Warning (62)
2001/11/12 A New Rear Housing Assembly is Available {1157}
PMG3516 Power Module Starting the Engine
3512B and 3516B High Displacement Locomotive Engines Product Description
Automatic Transfer Switches CTG, CTGD Series General Information
PMG3516 Power Module Engine Crankcase Breather - Clean
2001/10/01 Parts Manuals for Skid Mounted Pumpers and Skid Mounted Power Packs Are Now Provided on CD-ROMs {7000}
G3500B Engines Fumes Disposal Filter Differential Pressure - Check
G3612 and G3616 Engines Crankcase Pressure - Measure - Engines with Fumes Disposal Filters
G3500 Generator Sets Fumes Disposal Filter - Drain
G3500B Engines Fumes Disposal Filter Element - Replace
3512B and 3516B High Displacement Locomotive Engines Specifications
Automatic Transfer Switches CTG, CTGD Series Control Connections of the Transfer Switch